Opinions of new 3D model of Cubby Tablet Mount for 370z?

ltullos · 02-08-2015, 04:09 PM

Quote:

Originally Posted by SDREC

Hi everyone,

If you or anyone else has tried making a cubby mount before please post your experience with some do's and dont's to help me along. I would really appreciate it. I will be modeling it in SolidWorks, so if you want the files as I go just let me know and I can send them.

Scott

I created (and am selling) a 3D printed mounting bezel, contracting a Solidworks 3D modeling and printing start-up. This started with a laser scan of the stock cubby which was used this to create the starting model which was modified from there. The biggest problem I encountered was resolving various clearance & interference issues so that the final product would bolt directly in, replacing the stock cubby. Since the model does not include all of the surrounding pieces, I had to solve this iteratively.

The other challenge I found was in sanding and finishing the printed bezel. As all printed surfaces are textured, you will likely have to either cover it with some material or sand and finish it. You are likely to find the latter more tricky than you think, particularly if you are trying to achieve an automotive grade smooth finish. Don't expect to be able to do this with rattle can spray paints; and like any painting it is essential to get the surface prep flawless.

Good luck in your quest!

Nut_N_Much · 02-08-2015, 04:13 PM

Want one! Will you sell?

Great job coming up with solutions that appear stock.

Quote:

Originally Posted by ltullos

I created (and am selling) a 3D printed mounting bezel, contracting a Solidworks 3D modeling and printing start-up. This started with a laser scan of the stock cubby which was used this to create the starting model which was modified from there. The biggest problem I encountered was resolving various clearance & interference issues so that the final product would bolt directly in, replacing the stock cubby. Since the model does not include all of the surrounding pieces, I had to solve this iteratively.

The other challenge I found was in sanding and finishing the printed bezel. As all printed surfaces are textured, you will likely have to either cover it with some material or sand and finish it. You are likely to find the latter more tricky than you think, particularly if you are trying to achieve an automotive grade smooth finish. Don't expect to be able to do this with rattle can spray paints; and like any painting it is essential to get the surface prep flawless.

Good luck in your quest!

ltullos · 02-08-2015, 08:52 PM

Quote:

Originally Posted by Nut_N_Much

Want one! Will you sell?

Great job coming up with solutions that appear stock.

You can check my stuff and order at my website. If you want to just order the unfinished bezel, you can save a few bucks ordering directly from Shapeways store

Drop me a PM if you have any questions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cubby Tablet Computer Mounting Kit	ltullos	Video/Audio	13	08-10-2017 11:43 PM
Cubby Tablet Mounting Bezel	ltullos	DIY Section (Do-It-Yourself)	47	12-08-2014 09:33 PM
Tablet install in cubby hole	alan49121	Audio & Video	9	03-28-2014 09:05 PM
Cubby Tablet (iPad Mini)	Bandit_Kaine	Exterior & Interior	31	09-04-2013 12:30 AM
Another Tablet Cubby Thread (Nexus 7)	Mr&Mrs	Exterior & Interior	82	06-29-2013 12:27 PM