Car wiring harness question

Mike · 09-29-2009, 02:58 PM

To start with
Base system
Pioneer F900BT
Peripheral PESWIPS steering wheel controls

I stole this from another thread

Now,
My Metra harness adapter only has wires at pin locations
2,3,4,5,10,11,12,13,14,16,18, 19 and 20, so most won't line up with the factory stuff.

The Peripheral PESWIPS steering wheel interface for pioneer says I need to tap into 6 and 15, but the harness adapter has no wires there. Does anyone know an easy way to remove the wires I don't need from the harness and relocate them?

At a minimum, I just ordered a scosche harness, although it looks the same, but I can at least destroy the molex connector to harvest the wires and pins if needed.

Or am I just missing something obvious?

Division · 09-29-2009, 03:08 PM

harvesting the pins is one idea, or you can just shave a bit of insulation off of the factory side of the harness and connect your PAC-SWI-PS there.

Mike · 09-29-2009, 09:09 PM

Quote:

Originally Posted by Division

harvesting the pins is one idea, or you can just shave a bit of insulation off of the factory side of the harness and connect your PAC-SWI-PS there.

yeah, I could do that, but that defeats the whole purpose of an aftermarket harness.

kenchan · 09-29-2009, 09:38 PM

are you looking at the connector from the right side? im using the exact steering wheel remote adapter thingie and scoche connector and it's working fine on my 3100.

Mike · 09-30-2009, 04:57 AM

Quote:

Originally Posted by kenchan

are you looking at the connector from the right side? im using the exact steering wheel remote adapter thingie and scoche connector and it's working fine on my 3100.

I'm looking at it correctly, it just only has one of the steering wheel wires on it. I do have the Metra one though. The scosche one is on order now, so we will see what it looks like when I actually have it in hand.

09-29-2009, 02:58 PM	#1 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	Car wiring harness question To start with Base system Pioneer F900BT Peripheral PESWIPS steering wheel controls I stole this from another thread Now, My Metra harness adapter only has wires at pin locations 2,3,4,5,10,11,12,13,14,16,18, 19 and 20, so most won't line up with the factory stuff. The Peripheral PESWIPS steering wheel interface for pioneer says I need to tap into 6 and 15, but the harness adapter has no wires there. Does anyone know an easy way to remove the wires I don't need from the harness and relocate them? At a minimum, I just ordered a scosche harness, although it looks the same, but I can at least destroy the molex connector to harvest the wires and pins if needed. Or am I just missing something obvious? __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
re-wiring to keep vdc off	boosted180	DIY Section (Do-It-Yourself)	26	02-01-2010 11:12 AM
Upgrading stock Subs - wiring question	evse82	Audio & Video	6	07-28-2009 05:22 PM
Help Disconnecting Door Harness	zero610	Audio & Video	9	05-18-2009 03:39 PM
Amp Wiring Path	JerryK	Audio & Video	6	05-08-2009 12:18 AM
wiring harness	510z	Audio & Video	4	04-30-2009 06:05 PM

09-29-2009, 03:08 PM	#2 (permalink)
Division Base Member Join Date: Jul 2009 Location: Central FL Posts: 199 Drives: 2009 370Z Sport Rep Power: 17	harvesting the pins is one idea, or you can just shave a bit of insulation off of the factory side of the harness and connect your PAC-SWI-PS there.

09-29-2009, 09:38 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	are you looking at the connector from the right side? im using the exact steering wheel remote adapter thingie and scoche connector and it's working fine on my 3100.