![]() |
Hey Delorean, If memory serves me correctly, one of those wire harnesses goes into the TFT display, and the other goes in to the module on the rear of the
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#8 (permalink) |
Track Member
Join Date: Feb 2013
Location: FL
Posts: 834
Drives: 2019 Civic Type R
Rep Power: 15 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Hey Delorean,
If memory serves me correctly, one of those wire harnesses goes into the TFT display, and the other goes in to the module on the rear of the TFT that supposedly does the Apple device interface. There were two large plugs on the rear of my radio TFT when I put the parking bypass module in there behind the TFT. The instruction manual for my bypass module reads thusly: *Installation notes: When installing NI24PIN Y-harness must be connected behind LCD screen directly, in some Nissan vehicles behind LCD you will find a module, many customers think that this module is part of the screen, this module is NOT a part of the screen and you must connect Y-harness behind LCD screen, LCD screen and LCD module if attached have identical plugs, keep in mind LCD screen have only ONE connector while LCD module have few connectors. CONNECT ONLY DIRECTLY INTO LCD SCREEN WITH ONE CONNECTOR Another view from CourtesyParts.com...http://www.courtesyparts.com/370z-pa...8759_8782.html Last edited by Fountainhead; 03-06-2014 at 10:04 PM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Aftermarket navi Install.. Kenwood 5140.. No horn or beeps with locking!! | LudeSH01 | Audio & Video | 7 | 03-31-2015 11:11 AM |
remove factory nav, install factory cubby | TPrelude-370z | Exterior & Interior | 17 | 02-06-2012 01:40 AM |
how to install line driver on factory bose amp? | tl1284494730 | Audio & Video | 3 | 09-19-2011 11:41 PM |
Factory Navi? | Reaper42 | Audio & Video | 5 | 01-21-2010 09:39 PM |
factory navi same as G37 | hori | Audio & Video | 2 | 09-18-2009 05:12 PM |