[Help] Finding the crimp terminal part to wire in camera.

sselemit · 06-23-2013, 07:39 AM

Hi, does anyone know where to get this part with correct dimension as in the picture?

With this, we can add an RCA wire to the existing connector on the back of the HU to add a camera in.

Note: The connectors on the back are TH24FW-NH (Female) and TH24MW-NH (Male)
The above terminal goes inside the little square holes in this plug.

italy3541 · 06-23-2013, 07:47 AM

you can get these at radio shak, they should have them in the bins. That is just a normal pin for most harnesses. The size may be a lil hard to find. But im sure if you ask someone there they could check and see if they have them in stock. If you still have no luck you can always unpin a aftermarket wire harness and use one of those. Its a bit of a pain in the a** to do it without breaking the pin because they break easily, but it can be done.

sselemit · 06-23-2013, 08:04 AM

Thank you for the suggestion. I guess I can just buy this and have 20 tries to pull out 2 intact pins.

italy3541 · 06-23-2013, 09:38 AM

that would work...lol..

SouthArk370Z · 06-23-2013, 10:04 AM

Get a "pin extractor"* and your success rate will jump from close to 0% to close to 100%.

* Just the first example I found; not a recommendation (but it does appear to be a decent one).

06-23-2013, 07:39 AM	#1 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	[Help] Finding the crimp terminal part to wire in camera. Hi, does anyone know where to get this part with correct dimension as in the picture? With this, we can add an RCA wire to the existing connector on the back of the HU to add a camera in. Note: The connectors on the back are TH24FW-NH (Female) and TH24MW-NH (Male) The above terminal goes inside the little square holes in this plug. Last edited by sselemit; 06-23-2013 at 07:47 AM.

06-23-2013, 07:47 AM	#2 (permalink)
italy3541 A True Z Fanatic Join Date: Jan 2011 Location: pa Posts: 1,491 Drives: 2014BMW Z4 35isdrive Rep Power: 17	you can get these at radio shak, they should have them in the bins. That is just a normal pin for most harnesses. The size may be a lil hard to find. But im sure if you ask someone there they could check and see if they have them in stock. If you still have no luck you can always unpin a aftermarket wire harness and use one of those. Its a bit of a pain in the a** to do it without breaking the pin because they break easily, but it can be done. Cbtech likes this.

06-23-2013, 08:04 AM	#3 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	Thank you for the suggestion. I guess I can just buy this and have 20 tries to pull out 2 intact pins. Last edited by sselemit; 06-23-2013 at 08:06 AM.

06-23-2013, 10:04 AM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Get a "pin extractor"* and your success rate will jump from close to 0% to close to 100%. * Just the first example I found; not a recommendation (but it does appear to be a decent one). __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trouble locating orange reverse wire for backup camera!	Sagi	Audio & Video	12	04-24-2020 09:13 PM
Backup camera wire question -HELP	kdrshocker	Audio & Video	6	10-11-2010 05:32 PM
NEED HELP: Installing reverse camera, need to know what wire to tap for power when...	370Zvetlana	Audio & Video	7	03-17-2010 03:02 PM

06-23-2013, 09:38 AM	#4 (permalink)
italy3541 A True Z Fanatic Join Date: Jan 2011 Location: pa Posts: 1,491 Drives: 2014BMW Z4 35isdrive Rep Power: 17	that would work...lol..