I give up on ASWC

Gmendez · 12-18-2012, 12:59 PM

Installed AVIC-X920BT with ASWC almost 2 years ago. ASWC has never worked. Spent 3 hours yesterday reviewing wiring, updating the firmware and reinstalling. Still no luck. ...I give up

kenchan · 12-18-2012, 01:06 PM

try PAC or Periphal. it's all manual but it works. that's what i use on my Z and G.

Coon-azz · 12-18-2012, 01:16 PM

Quote:

Originally Posted by Gmendez

Installed AVIC-X920BT with ASWC almost 2 years ago. ASWC has never worked. Spent 3 hours yesterday reviewing wiring, updating the firmware and reinstalling. Still no luck. ...I give up

So what is ASWC?

Coon-azz · 12-18-2012, 01:19 PM

oK, some research on this indicates the same feedback from several users as this one, "Hey all,

I just thought I would share my experience with the Axxess ASWC steering wheel control adapter. I bought it for 62 bucks shipped (much less than the PAC one) and have it installed with a X920BT.

Its very simple to install. I think I had a total of 4-5 wires to tap into. Upon connecting the wires, it works right out of the box with no programing! Plus there is ZERO delay!

There is one issue I ran into when using this with my X920BT. Im not sure it this is a ASWC issue or a pionner issue, but here is my problem.

By default, the track up and down buttons work fine for ipod, dvd, CD, SD MP3. But when your in radio mode, track up and down do NOT jump presets. Track up and down ONLY change the station one notch.

So if Im listening to 106.7 and hit track up, it goes to 106.9. That sucks!
Now, it can be programed to do radio presets up and down. But doing that, means you loose track up and down for ipod, CD, DVD and MP3.

Im left wondering if I should have got the slow PAC control now...."

Further research shows that other users state this is a Known Pioneer issue... they recommend trying Pac's, version 1.6.8; as they are a lot faster.

Not sure how much this helps.

cheshirecat · 12-18-2012, 02:37 PM

I used the AWSC with my Pioneer AVH8400 and it worked with manual programming. Sounds like there's an issue just between it and the 920. I'd definitely say the next step is trying the PAC.

bigaudiofanat · 12-18-2012, 02:39 PM

Quote:

Originally Posted by kenchan

try PAC or Periphal. it's all manual but it works. that's what i use on my Z and G.

If he is not using the correct wires it will not work either way. The Metra Axxess is much better than the pac all day.

kenchan · 12-18-2012, 02:45 PM

yet people are STILL having problems...

Gmendez · 12-18-2012, 03:05 PM

Quadruple checked my wiring...can't look at it anymore. Even re-did it twice.

kenchan · 12-18-2012, 03:11 PM

yah, sometimes just best to go old skool. try the pac or peripheral. your local bestbuy should have them or buy through amazon for dirt cheap.

GL!

bigaudiofanat · 12-18-2012, 06:17 PM

Make sure you grounded the black wire from the stock harness. Also believe it or not it could be a bad harness and or module. I had a problem with a re-q one time. Bought a second one plugged it in and still had a problem. It ended up being the re-q's harness.

12-18-2012, 12:59 PM	#1 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 15	I give up on ASWC Installed AVIC-X920BT with ASWC almost 2 years ago. ASWC has never worked. Spent 3 hours yesterday reviewing wiring, updating the firmware and reinstalling. Still no luck. ...I give up

12-18-2012, 01:19 PM	#4 (permalink)
Coon-azz Track Member Join Date: Mar 2012 Location: Fredericksburg,VA Posts: 689 Drives: '12 370z Sport DD Rep Power: 14	oK, some research on this indicates the same feedback from several users as this one, "Hey all, I just thought I would share my experience with the Axxess ASWC steering wheel control adapter. I bought it for 62 bucks shipped (much less than the PAC one) and have it installed with a X920BT. Its very simple to install. I think I had a total of 4-5 wires to tap into. Upon connecting the wires, it works right out of the box with no programing! Plus there is ZERO delay! There is one issue I ran into when using this with my X920BT. Im not sure it this is a ASWC issue or a pionner issue, but here is my problem. By default, the track up and down buttons work fine for ipod, dvd, CD, SD MP3. But when your in radio mode, track up and down do NOT jump presets. Track up and down ONLY change the station one notch. So if Im listening to 106.7 and hit track up, it goes to 106.9. That sucks! Now, it can be programed to do radio presets up and down. But doing that, means you loose track up and down for ipod, CD, DVD and MP3. Im left wondering if I should have got the slow PAC control now...." Further research shows that other users state this is a Known Pioneer issue... they recommend trying Pac's, version 1.6.8; as they are a lot faster. Not sure how much this helps. __________________ I don't care how slow you want to drive; I encourage it. JUST GET THE HELL OUT OF THE PASSING LANE YOU TUCK FARD!!!

12-18-2012, 06:17 PM	#10 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Make sure you grounded the black wire from the stock harness. Also believe it or not it could be a bad harness and or module. I had a problem with a re-q one time. Bought a second one plugged it in and still had a problem. It ended up being the re-q's harness. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axxess ASWC wiring.	Z33knight	Audio & Video	16	12-19-2019 11:54 AM
Axxess ASWC or Pac SWI-PS Question	Tomboy	Audio & Video	10	12-30-2011 09:45 AM
Axxess ASWC Question	Raizon	Audio & Video	11	07-05-2011 12:11 AM
noob q about aswc wiring	Kandy OrangeZ	Audio & Video	4	07-03-2011 07:27 AM
Axxess ASWC malfunction?	turbodog	Audio & Video	3	04-11-2011 02:31 PM

12-18-2012, 01:06 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	try PAC or Periphal. it's all manual but it works. that's what i use on my Z and G.

12-18-2012, 02:37 PM	#5 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	I used the AWSC with my Pioneer AVH8400 and it worked with manual programming. Sounds like there's an issue just between it and the 920. I'd definitely say the next step is trying the PAC.

12-18-2012, 02:45 PM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yet people are STILL having problems...

12-18-2012, 03:05 PM	#8 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 15	Quadruple checked my wiring...can't look at it anymore. Even re-did it twice.

12-18-2012, 03:11 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, sometimes just best to go old skool. try the pac or peripheral. your local bestbuy should have them or buy through amazon for dirt cheap. GL!