05-24-2014, 09:00 AM
|
#1 (permalink)
|
|
Base Member
Join Date: May 2014
Location: NJ
Posts: 4
Drives: 2013 370 NISMO
Rep Power: 12
|
I just did this on my 2013 NISMO. I caught the grey line on the driver side kick panel, and carefully cut through the gray shield.
There are four (4) wires and a shield wire in this packet (Green, White, Red, Black and again shield wire).
You need to splice an RCA wire, and connect the Red wire to the Positive (Video), and the Black wire to the negative (Video). Then, connect the Green wire to reverse wire on the back of your head unit. Be advised, the green wire INSIDE the grey pack of wires is a 6V wire, and the darker green wire OUTSIDE the pack of grey shield is 12V. Either 6V and/or 12V will work just fine with the Stock camera of the 370.
As well, I have a Kenwood DNX891HD head unit. I am running an iData Link Maestro Rr connected to the Can high and Can low, which allows me to run a dash command style program on the head unit. As well, it allows FULL steering wheel use with the Kenwood units. I use to have an Avic z140BT installed in my 350 NISMO, but that unit SUCKS. Any questions, feel free to ask. I can take pics of the head unit connected if needed.
Last edited by NJ NISMO; 05-24-2014 at 09:08 AM.
Reason: Forgot to add the type of head unit I'm running
|
|
|
Similar Threads
4Likes
Hybrid Mode
