New Car Setero Set-up

MacLean

I had my set up installed. The only Dynamating done was the speaker mounts in the doors. Man I'm not sure about the power wiring, but I did go with the JL Audio wiring. Thnxs for the props on the set up. I do not get any annoying vibrations from the subs. Of course if you turned the volume all the way up & on certain songs you will feel it for sure. I can adjust the EQ on the HU if I think the bass is too much. The HU volume goes to 38 or 40 (or more) which is the max for the volume. When you are at 12-14 for the volume there is no complaints. I usually have the volume anywhere from 10-14, but vary rarely go 16 plus. If you go into the high teens to low twenties, then driving for a length of time could get annoying (headache). The amp is 600 watts (150 x 4) and each of my speakers RMS is 150 watts, so I am not going to blow my speakers. Well I could if I was an idiot and put all the gains on the amp to 100%.

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l