Installed avic-940BT, backup camera wiring question.

ryang

Got the splice tap connector, for the reverse lead from the radio. It is probably not perfect but it worked. The orange wire leading to the left tail light is where I tap. It is the only tan/orange wire in there.

Ran into a different problem, The power wire from the camera is so small, that the splice connector couldn't cut through the insulation, I ended up splice the wire and used a lot of electrical tape. When I get more time I would open it up and get one of those posi lock connector to make it more secure. For now I think it is good enough and everything works perfectly.

Thanks for all The advice. This is so much better than the stock base radio.