Can we start a STICKY for install materials needed?

abakja1 · 09-24-2009, 03:54 PM

I thought that we should start on a sticky for what is needed for an install since this is a new car model.

Items listed would be for:

1. Antenna adapter and if there are different brands other than Metra
Scosche NAA2B 2007 - Up Nissan Versa Antenna Adapter

2. Wiring harness adapters to for stock harness
Scosche NN04B 2007 - Up Nissan Radio Wiring Harness

3. Steering wheel adapter module
4. Single din mounting hardware.
5. Any other??

I been searching the threads and this would be a good start off and if people could mention where they bought it for and how much, it would help businesses too..

Im going to do my shopping on ebay with posted info..

kenchan · 09-24-2009, 04:31 PM

if you're doing a double din you can use the base factory trim...
no need for the metra kit.

you're going to need a T20 torx screw driver.

also probably recommend you get some EZ felt from some artsy
store just in case you got a gap between your factory stereo facia
and the factory trim.

i also solder all my connections so you'll need a soldering gun,
solder, and some e-tape.

if you want to make a video bypass switch, you'll need to get a
normally closed momentary push-switch. you'll also want to
have a drill/drill bit to install your push switch.

09-24-2009, 03:54 PM	#1 (permalink)
abakja1 Enthusiast Member Join Date: Sep 2009 Location: Hawaii Posts: 351 Drives: STI, MDX, Titan Rep Power: 304	Can we start a STICKY for install materials needed? I thought that we should start on a sticky for what is needed for an install since this is a new car model. Items listed would be for: 1. Antenna adapter and if there are different brands other than Metra Scosche NAA2B 2007 - Up Nissan Versa Antenna Adapter 2. Wiring harness adapters to for stock harness Scosche NN04B 2007 - Up Nissan Radio Wiring Harness 3. Steering wheel adapter module 4. Single din mounting hardware. 5. Any other?? I been searching the threads and this would be a good start off and if people could mention where they bought it for and how much, it would help businesses too.. Im going to do my shopping on ebay with posted info.. Last edited by abakja1; 09-24-2009 at 04:33 PM. Reason: Info from AK370Z's Thread....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STICKY How much did you pay for your 370Z?STICKY	Slidefox	New 370Z Owner	829	12-19-2022 01:42 PM
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 07:35 AM
Sticky shifter. 1st gear	trent1331	Nissan 370Z General Discussions	6	09-14-2009 11:40 PM
1/4 Mile sticky	BanningZ	The370Z.com Feedback, Suggestions & Questions	6	08-26-2009 10:48 AM
Can we get a sticky for prices paid?	Pushing_Tin	The370Z.com Feedback, Suggestions & Questions	3	01-02-2009 12:28 PM

09-24-2009, 04:31 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	if you're doing a double din you can use the base factory trim... no need for the metra kit. you're going to need a T20 torx screw driver. also probably recommend you get some EZ felt from some artsy store just in case you got a gap between your factory stereo facia and the factory trim. i also solder all my connections so you'll need a soldering gun, solder, and some e-tape. if you want to make a video bypass switch, you'll need to get a normally closed momentary push-switch. you'll also want to have a drill/drill bit to install your push switch.