Nissan 370Z Forum - View Single Post - Can we start a STICKY for install materials needed?

kenchan · 09-24-2009, 04:31 PM

if you're doing a double din you can use the base factory trim...
no need for the metra kit.

you're going to need a T20 torx screw driver.

also probably recommend you get some EZ felt from some artsy
store just in case you got a gap between your factory stereo facia
and the factory trim.

i also solder all my connections so you'll need a soldering gun,
solder, and some e-tape.

if you want to make a video bypass switch, you'll need to get a
normally closed momentary push-switch. you'll also want to
have a drill/drill bit to install your push switch.

09-24-2009, 04:31 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	if you're doing a double din you can use the base factory trim... no need for the metra kit. you're going to need a T20 torx screw driver. also probably recommend you get some EZ felt from some artsy store just in case you got a gap between your factory stereo facia and the factory trim. i also solder all my connections so you'll need a soldering gun, solder, and some e-tape. if you want to make a video bypass switch, you'll need to get a normally closed momentary push-switch. you'll also want to have a drill/drill bit to install your push switch.