370Z Sub Box Feeler

37Z · 11-22-2011, 06:56 PM

I am creating a mold for a fiberglass sub box that would be replace the foam piece located in front of the space tire in the rear hatch area of a 370Z.

The sub box would include space for a small amp and 2-3 6.5" subs or 1-2 8" subs. The existing foam piece (see attached pic) would be removed and replaced (drop-in) with this sub box. The height would vary depending upon the sub size. The height could flush with the rear hatch floor for 6.5" subs; otherwise, will have to extend up above the floor a couple of inches to clear a 8" sub.

This is an initial feeler to gauge interest. I will give interior specs to properly size your sub's XMAS and other sub spec requirements later. PM back if interested.

90 ST · 11-22-2011, 08:59 PM

i've thought about doing 3 or 4 8" in that spot, sounds like a good idea, maybe look at a vented box maybe?

eastwest2300 · 11-22-2011, 09:05 PM

Fiberglass is always nice!

Astrosfan · 11-26-2011, 02:07 PM

hmmm.... im interested. Im looking to do an upgrade around the first of the year.

i was thinking about making a mdf box to fit int he spare tire with either an 8 or shallow 10. i wonder if you could fit 2 8" jlw3s?

eastwest2300 · 11-26-2011, 05:10 PM

Quote:

Originally Posted by Astrosfan

hmmm.... im interested. Im looking to do an upgrade around the first of the year.

i was thinking about making a mdf box to fit int he spare tire with either an 8 or shallow 10. i wonder if you could fit 2 8" jlw3s?

I would get with someone that does custom fabrications like that, and have them do measurements.

37Z · 11-27-2011, 09:58 AM

Quote:

Originally Posted by eastwest2300

I would get with someone that does custom fabrications like that, and have them do measurements.

8" sub will not fit flush with the hatch floor. This area is only 7" wide and 7" deep. If you raise the sub box above the hatch floor a couple of inches or less, then you can install a 8" sub.

JL Audio 6W3v3 will fit with no problem flush with the hatch floor.

bigaudiofanat · 11-27-2011, 10:02 AM

Quote:

Originally Posted by 37Z

8" sub will not fit flush with the hatch floor. This area is only 7" wide and 7" deep. If you raise the sub box above the hatch floor a couple of inches or less, then you can install a 8" sub.

JL Audio 6W3v3 will fit with no problem.

There are some 8 inch woofers that you could fit depending on their air volume required and their mounting depth.

37Z · 11-27-2011, 10:53 AM

Quote:

Originally Posted by bigaudiofanat

There are some 8 inch woofers that you could fit depending on their air volume required and their mounting depth.

I curious on what 8" subs you are refering to that will fit into a 7" wide space.

Wiggins3377 · 11-27-2011, 11:23 AM

I'd be interested if the price is right. Personally I would like to see the box rise above the rear floor board (maybe to the height of the bar back there). It would be nice to get the box painted to match exterior etc. and to show off the craftsmanship.

37Z · 11-27-2011, 03:12 PM

Quote:

Originally Posted by Wiggins3377

I'd be interested if the price is right. Personally I would like to see the box rise above the rear floor board (maybe to the height of the bar back there). It would be nice to get the box painted to match exterior etc. and to show off the craftsmanship.

The sub box would likely be somewhat lower than the aluminum cross bar. This would give approximately 8" interior height. This interior height should be adequate for a JL audio 8w7-3 sub (one of the larger 8" subs on the market and would be sized for its recommended enclosure volume being 0.875cu.ft.).

Personally, I am only adding a Alpine SWR-843D 8" sub so I only need the height for the diameter of the sub.

Regarding the caftsmanship of the sub box; it will likely be fiberglass with a basa core to make it light and keep the interior volume as large as possible.

scionide · 11-27-2011, 04:24 PM

Interested in seeing the final product, I like the idea so far though!

eastwest2300 · 11-27-2011, 06:45 PM

Quote:

Originally Posted by Wiggins3377

I'd be interested if the price is right. Personally I would like to see the box rise above the rear floor board (maybe to the height of the bar back there). It would be nice to get the box painted to match exterior etc. and to show off the craftsmanship.

eastwest2300 · 11-27-2011, 06:46 PM

Quote:

Originally Posted by scionide

Interested in seeing the final product, I like the idea so far though!

Me too, get 'r dun.

37Z · 11-29-2011, 06:36 PM

Quote:

Originally Posted by scionide

Interested in seeing the final product, I like the idea so far though!

So, based upon the responds, I will send back a few design concepts of the initial sub box. The idea is to remove the foam piece located in the rear hatch area and replace it with a sub box. The sub box would be designed to accomodate 8" diameter subs; the largest sub being a JS Audio 8w7-3 8" sub. I will email the initial interior volume (cu.ft.) to gauge the necessary enclosure space specifications.

eastwest2300 · 11-29-2011, 07:57 PM

Quote:

Originally Posted by 37Z

So, based upon the responds, I will send back a few design concepts of the initial sub box. The idea is to remove the foam piece located in the rear hatch area and replace it with a sub box. The sub box would be designed to accomodate 8" diameter subs; the largest sub being a JS Audio 8w7-3 8" sub. I will email the initial interior volume (cu.ft.) to gauge the necessary enclosure space specifications.

Sweet man, Im looking forward to seeing the finished product

11-22-2011, 09:05 PM	#3 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,818 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684549	Fiberglass is always nice! __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Feeler: MRWorks Show 370z One of a Kind	Marco_xyz	370Z For Sale	173	06-13-2012 01:39 PM
[FOR SALE] Feeler: 370z part out thread!	FastPaced	Parts for sale (Private Classifieds)	47	11-05-2011 12:13 AM
Feeler: Selling my manual monterey blue 370z	MblueZ34	Cars for sale (Private Classifieds)	37	09-14-2011 06:43 PM
Feeler FS/FT: 19" Nismo 370z Rims 19x9.5 +40/10.5 +23 SOCAL	hdskull	Parts for sale (Private Classifieds)	16	03-10-2011 10:52 PM
feeler: trade my G37s black for 370z	Nick	370Z For Sale	0	01-21-2010 07:24 PM

11-22-2011, 08:59 PM	#2 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 420	i've thought about doing 3 or 4 8" in that spot, sounds like a good idea, maybe look at a vented box maybe?

11-26-2011, 02:07 PM	#4 (permalink)
Astrosfan Enthusiast Member Join Date: Jan 2010 Location: houston, TX Posts: 427 Drives: 09 370z PG Sport Rep Power: 15	hmmm.... im interested. Im looking to do an upgrade around the first of the year. i was thinking about making a mdf box to fit int he spare tire with either an 8 or shallow 10. i wonder if you could fit 2 8" jlw3s?

11-27-2011, 11:23 AM	#9 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 76	I'd be interested if the price is right. Personally I would like to see the box rise above the rear floor board (maybe to the height of the bar back there). It would be nice to get the box painted to match exterior etc. and to show off the craftsmanship.

11-27-2011, 04:24 PM	#11 (permalink)
scionide Enthusiast Member Join Date: Mar 2011 Location: so-cal Posts: 436 Drives: 11 370z PW 6mt Rep Power: 14	Interested in seeing the final product, I like the idea so far though!