Annoying rattle/vibration!!!

Mr&Mrs · 06-10-2011, 03:12 PM

I recently got around to having my Amuse wing put on and now when my sub is bumping just a tiny bit I get a vibration on the lower, top portion of the wing. I am an audio idiot and the best thing I could come up with to combat this is fill the wing with spray foam.

Will this fix the problem? How hard is it to fill a wing? Im screwed if I miss a spot. I also do not want to add 40 lbs of foam to the car! I already have added enough with all my carbon fiber and wheels. Plus that stuff makes a huge mess of anything it touches.

Thanks!

TWYNBYZ · 06-10-2011, 04:00 PM

What about dynamat? That should help reduce vibrations.......

djpathfinder · 06-10-2011, 04:25 PM

Do you think it's something inside the wing that's rattling or where the wing (or mounting hardware) comesinto contact with the hatch that's vibrating? I'm thinking the latter, in which case some felt or thin foam tape or even thin cork might remedy the problem.

Mr&Mrs · 06-13-2011, 01:33 PM

Quote:

Originally Posted by CGMMNY

What about dynamat? That should help reduce vibrations.......

I am not sure this will help my issue.

Quote:

Originally Posted by djpathfinder

Do you think it's something inside the wing that's rattling or where the wing (or mounting hardware) comesinto contact with the hatch that's vibrating? I'm thinking the latter, in which case some felt or thin foam tape or even thin cork might remedy the problem.

It is not an attachment issue. I will try and get a vid up or at least a picture of the wing, because it is to hard to explain where the vibration is coming from.

To try again in words...the wing is not solid. It has a gap of about 2" between where it mounts and the top part of the bottom half of the wing. That allows a vibration and makes noise.

_ace_ · 06-14-2011, 04:33 PM

Clay, foam, or anything gummy in direct contact between the vibrating surfaces will generally stop audible vibrations, but the location is the key. Lithium or other thick greases work great if it's low mass, meaning not a lot of material is physically moving.

If you fill the wing with foam it will work if you dampen the interface, but if not you'll have a foam filled wing that still makes noise. If you can reproduce the noise with the car parked, get a makeshift stethoscope and try to pinpoint the problem before you decide on a good solution.

Ian B · 06-14-2011, 08:21 PM

It could be your license plate rattling. Put some 2 sided tape and that should fix it.

Ian B

06-10-2011, 03:12 PM	#1 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31941	Annoying rattle/vibration!!! I recently got around to having my Amuse wing put on and now when my sub is bumping just a tiny bit I get a vibration on the lower, top portion of the wing. I am an audio idiot and the best thing I could come up with to combat this is fill the wing with spray foam. Will this fix the problem? How hard is it to fill a wing? Im screwed if I miss a spot. I also do not want to add 40 lbs of foam to the car! I already have added enough with all my carbon fiber and wheels. Plus that stuff makes a huge mess of anything it touches. Thanks! __________________ Project Z <--Click - Check out the link too many mods to list!

06-10-2011, 04:25 PM	#3 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 734	Do you think it's something inside the wing that's rattling or where the wing (or mounting hardware) comesinto contact with the hatch that's vibrating? I'm thinking the latter, in which case some felt or thin foam tape or even thin cork might remedy the problem. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Homelink Mirror Rattle, ANNOYING!	spearfish25	Exterior & Interior	15	07-17-2011 07:11 PM
Annoying vibration within the hatch....	Sebz	Exterior & Interior	2	10-13-2010 01:25 AM
Rattle in dash from Engine vibration!!	AH370Z	Nissan 370Z General Discussions	6	11-01-2009 03:56 PM
Annoying hatch steel cross bar buzzing/rattle	ddvette9	Nissan 370Z General Discussions	14	10-31-2009 02:23 AM
Rear View Mirror Vibration/Rattle???	bucknakedru	Exterior & Interior	5	06-10-2009 08:39 AM

06-10-2011, 04:00 PM	#2 (permalink)
TWYNBYZ Base Member Join Date: Jan 2011 Location: S. Cali Posts: 229 Drives: 2013 Pearl White GTR Rep Power: 15	What about dynamat? That should help reduce vibrations.......

06-14-2011, 04:33 PM	#5 (permalink)
_ace_ Base Member Join Date: May 2011 Location: USA Posts: 140 Drives: 370Z Rep Power: 15	Clay, foam, or anything gummy in direct contact between the vibrating surfaces will generally stop audible vibrations, but the location is the key. Lithium or other thick greases work great if it's low mass, meaning not a lot of material is physically moving. If you fill the wing with foam it will work if you dampen the interface, but if not you'll have a foam filled wing that still makes noise. If you can reproduce the noise with the car parked, get a makeshift stethoscope and try to pinpoint the problem before you decide on a good solution.

06-14-2011, 08:21 PM	#6 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137466	It could be your license plate rattling. Put some 2 sided tape and that should fix it. Ian B