Rear Speaker Panel Removal with pics

optiontrader

Juleous,

I know in your thread installing the Brutus, there's barely enough room to mount it with an amp rack behind the crossbrace.

How much clearance height-wise, if any, is there beneath the two plastic storage shelves in front of the crossbrace (just behind the seats)?

__________________

40th Anniversary Z - 3M Paint Protection Film, CA Legal Tint! (70/40)

Juleous

It depends on how you build up the false floor, I had max 2.75" clearance but you could get more if you tried hard. Upto 4" I would say if you build the floor low enough. The issue I found was the mounting stud bolts sticking up everywhere in there, you need to do a bunch of drilling to get the floor to sit as low as possible. Also with the large metal brace in the floor that sits at an angle, this angle will take up some of your space and cause you to angle the amp so it will slide under the plastic brace assembly.

Then of course good luck tuning your setup with the amp down there, I pulled out the Brutus and stuck my Punch 300-2 down there. It was really easy to tune with no sub in the car, got all the front and rear setup dialed in. Now comes the sub box on top of it all.