Osiris, I went back and looked it up and you have to follow 2 DIYs to get it done. First look at rarwz's post on page 2 of the thread http://www.the370z.com/diy-section-d...era-dvd-2.html for info on taking the dash and radio apart to access the wiring harness. Then switch to terrycs's and toc2rta's post on this thread http://www.the370z.com/audio-video/1...ck-2010-a.html for which wire to ground for the parking break (it also shows the VSS wire you can interrupt with a switch for the nav bypass). Make sure to follow the pictures for the 2010s if that is what you have and not the 2009s.


Mize, my DIY for running the wires in a Roadster is here: http://www.the370z.com/nissan-370z-r...-roadster.html

I wouldn't mind having it in 2 separate kits for the sake of time/convenience. And with respect to the bypass kit I would be fine with either option 3 or 4.

I like the idea of hard switches so I can visually see if a setting is ON/OFF and also I don't have to worry about hitting a button in my pocket by accident. The downside I can see to hard switches (especially us guys with the heated touring seats) is the lack of a clean install location. I suppose I could recess a switch board in the glove box opening so that the passenger would have to control the bypasses...this would prevent me from unsafe driving habits as wall.

Count me in, 2009.

2009:
1. daisuke149
2. jpritche
3. kevin1985912
4. douglaslperry
5. ENT-Z
6. kenyada
7. Smallywood
8. fatboy1020
9. toner123
10. nissan ned
11. pensfan
12. phelan
13. Juruki
14. wilsonp
15. CharBoiler
16. Lloydy
17. Asmar
18. Zippin

Here is the list of people who expressed interest in the 2009 nav tool group buy. I pmed all of you the same message asking for your email address. So far, only the people have been crossed out have responded. If your name is not crossed out, please message me as soon as possible. This group buy is being held up b/c it can't move forward until i have 15 responses. (asmar i just sent you the message tonight so this doesn't really apply to you in terms of taking while to respond)

Did you forget to cross me out?

No, you're listed as #14, your alter ego is #3. :roflpuke2:

:icon18:

edited, sorry, don't know how you got lsted twice. i made a spread sheet with all the info for everyone that responded, so thats how i'm keeping track.

Jeff. are the 2010 guys waiting until the '09's get done? Thx.

I'm in. 2009 touring.

nope, totally separate:tup:

Cool!! What is the time frame for us? :excited:

Jeff, can we start the list for 2010 guys? This is from a planning perspective, I'm not as worried about any reaching any total magic number.

The pricing will be as follows:
Kit excluding camera $100
Kit including Kenwood CMOS-200 camera $289

If we could collect who wants with or without cameras that would be great.

Great, yea go ahead, as long as you have everything worked out with AK, which it seems like you do. :tup:

I think you might want to start a new thread and put a link from here to there, specifically for the 2010 kit. perhaps have the 2 separate lists like you mentioned, one for w/ camera, one without. :tup:

Kit with camera please. Approximate time frame for kit assembly and shipping? Before Xmas? After? No panic.... this is a great thread!