Where to buy navigation buttons harness?

squid267 · 03-14-2016, 05:41 PM

Looking for a plug with pigtail that fits this:

The picture is the backside of navigation buttons for a nav trim Z. Been searching thru the service manual, no luck yet. Hoping I can find it without buying an entire harness. Thanks.

RonRizz · 03-15-2016, 01:42 AM

Keep searching the manual. It should be in there.

scope22 · 03-15-2016, 08:23 AM

Quote:

Originally Posted by squid267

Looking for a plug with pigtail that fits this:

The picture is the backside of navigation buttons for a nav trim Z. Been searching thru the service manual, no luck yet. Hoping I can find it without buying an entire harness. Thanks.

you can't, i bought the whole harness from ebay just so i can get the plug...

SouthArk370Z · 03-15-2016, 08:53 AM

The FSM will have the generic code for the connector. Do a web search for that number. Same place that has connector should also carry the required connector pins.

The connectors/pins are usually easy to find but are often sold in lots of 100+ units.

squid267 · 03-15-2016, 10:10 AM

Thanks for the advice. I was able to get the official name which is 'Multifunction Switch'. Here's details on the connector, TH16FW-NH. My google game is weak right now, can't seem to find anything online for sale (even in bulk)

GaleForce · 03-15-2016, 10:20 AM

What section did you find that in? I am looking for pin outs on a few connectors. I can find the connector and the power pin location but not the full pin out like you have above.

TIA

squid267 · 03-15-2016, 10:35 AM

Quote:

Originally Posted by GaleForce

What section did you find that in? I am looking for pin outs on a few connectors. I can find the connector and the power pin location but not the full pin out like you have above.

TIA

Hey, that particular diagram was in the PG.pdf on page 87. Let me know, if I can provide any other direction.

GaleForce · 03-15-2016, 10:42 AM

Quote:

Originally Posted by squid267

Hey, that particular diagram was in the PG.pdf on page 87. Let me know, if I can provide any other direction.

That's the section I am using. They only list the power pin, the other pins have no info. Maybe my FSM is an older version, I'll look for an updated one.

Thanks again

SouthArk370Z · 03-15-2016, 10:55 AM

Quote:

Originally Posted by squid267

Thanks for the advice. I was able to get the official name which is 'Multifunction Switch'. Here's details on the connector, TH16FW-NH. My google game is weak right now, can't seem to find anything online for sale (even in bulk)

AKA: 6098-5279 or 60985279

squid267 · 03-16-2016, 08:48 AM

Quote:

Originally Posted by SouthArk370Z

AKA: 6098-5279 or 60985279

Thanks SouthArk. Emailed a vendor in China yesterday. They just got back willing to do 5 pieces for $2 a pop. Another idea for anyone else is to ask for a sample if only need one and they aren't willing to sell only one.

And Gale, I was using the 2012 version of FSM.

SouthArk370Z · 03-16-2016, 09:49 AM

Quote:

Originally Posted by squid267

Thanks SouthArk. Emailed a vendor in China yesterday. They just got back willing to do 5 pieces for $2 a pop. ...

You're welcome.

Sounds like a great price for a small order. Congrats on finding it.

Don't forget the pins. A crimping tool (to attach wiring to pins) and a pin extractor (for when you screw up and need to remove a pin from the connector) are VERY useful when putting the pins/connector together. You can get by with some pliers and a jeweler's screwdriver but the job becomes much more difficult.

GaleForce · 03-16-2016, 11:37 AM

Quote:

Originally Posted by squid267

Thanks SouthArk. Emailed a vendor in China yesterday. They just got back willing to do 5 pieces for $2 a pop. Another idea for anyone else is to ask for a sample if only need one and they aren't willing to sell only one.

And Gale, I was using the 2012 version of FSM.

Glad you were able to find the part.

I downloaded a more recent FSM. The plugs I'm looking at do not have the pins identified for function, they do show colour though. Looks like I'll have to meter them.

Thanks for your help

Jayhovah · 03-16-2016, 12:31 PM

Now find pins for the the big connector going to the doors so people can run big speaker wire without drilling a hole through the connectors. =)

03-14-2016, 05:41 PM	#1 (permalink)
squid267 Base Member Join Date: May 2013 Location: Worcester, MA Posts: 207 Drives: 12 Nismo 370Z PW M6 Rep Power: 38	Where to buy navigation buttons harness? Looking for a plug with pigtail that fits this: The picture is the backside of navigation buttons for a nav trim Z. Been searching thru the service manual, no luck yet. Hoping I can find it without buying an entire harness. Thanks.

03-15-2016, 01:42 AM	#2 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,133 Drives: 2 feet, 3 pedals Rep Power: 6774	Keep searching the manual. It should be in there. __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

03-15-2016, 08:53 AM	#4 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	The FSM will have the generic code for the connector. Do a web search for that number. Same place that has connector should also carry the required connector pins. The connectors/pins are usually easy to find but are often sold in lots of 100+ units. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

03-15-2016, 10:10 AM	#5 (permalink)
squid267 Base Member Join Date: May 2013 Location: Worcester, MA Posts: 207 Drives: 12 Nismo 370Z PW M6 Rep Power: 38	Thanks for the advice. I was able to get the official name which is 'Multifunction Switch'. Here's details on the connector, TH16FW-NH. My google game is weak right now, can't seem to find anything online for sale (even in bulk) GaleForce likes this.

03-15-2016, 10:20 AM	#6 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	What section did you find that in? I am looking for pin outs on a few connectors. I can find the connector and the power pin location but not the full pin out like you have above. TIA __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Special Limited Time Amuse Harness Bar & Bulletproof Edition Willans Harness Package	370Ztune	Body Interior/Exterior	25	07-22-2016 12:38 PM
[WTB] Navigation Cubby w/ Buttons	Stailey	Parts for sale (Private Classifieds)	3	12-16-2014 06:03 PM
Replace dummy buttons w/custom buttons	Random Strata	Exterior & Interior	8	09-29-2012 10:34 AM
4 Point Harness and Harness Bar Question	sixpax	Track / Autocross / Drifting / Dragstrip	4	06-13-2012 01:04 PM