Clarion NX500 Installed

Juleous

When gluing down the wood pieces make sure to cut them so the tops sit flush with the height on the mounting bolts sticking up. The blue ones are shorter than the couple of large silver ones. I had to cut the amp rack out where my new amp was mounted so it would clear under the support brace overhead. I then mounted the amp to the 2x2 pieces glued down and then placed the cut amp rack pieces to the left and right of the amp, this is the only way I could get the HiFonics in there and still mount the Bose gear and the MTX Re-Q. It might be hard to tell but the amp rack is cut to fit on either side of the Brutus, the amp is mounted directly to the glued down pieces. Works for now till I change it up.