Project SQL Setup in Docaam's Z

docaam

Mono Block amps converted to GCC Spec.



Sitting inside a trunk, under another amp, in a crammed space, with no ventilation and sealed these amps are going to go through a torture the engineers didnt expect. So a small 40mm fan is installed in two corners so there is complete air flow from all the ends. This should give the amps a little bit of peace. The fan would come on when the amp is turned on. So far the db on the fan is too low to be noticed and this shouldnt be bothersome.




Night shots aint good.
First rack been test fitted.



Wires wires wires... We decided against sending these wires through drilled holes in the trunk. No unnecessary drilling. We instead used a route used by factory wires. Neatly stacked the plastic cover shouldnt have a problem concealing them.



RCA lines routed through the opposite side to avoid noise pickup.







Arranging this is a pain



Box and amp rack waiting outside



Amp test fitted on the amp rack.






Today should be an exciting day!!!

__________________
Old 370Z SOLD but not forgotten
370Z 40th, G37s, S30 RBZ, Hakosuka Skyline