z110bt distorted output

jagodago · 05-05-2010, 11:13 AM

Well the speakers are 4 ohm and the amp is rated down to 2 so I am good there. the input side of the it amp is rated at 10k and I have found nothing on the z110bt to show what it is. I would assume that if it was a reflection issue I would hear distortion across the pre-amp gain range, it seems that when I am hitting the pre-amp harder distorts more. I have the HU pulled and plan on sending it in to Pioneer. One thing I plan on doing is buying a 3.5mm to RCA cable and trying to run the amp off of my ipod just to see if I can hear distortion. I'm not ruling out the amp or cross overs but I have no real way of checking it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer AVIC-Z110BT	vpn2001	Audio & Video	20	04-17-2010 10:36 AM
Pioneer AVIC Z110BT	Figtuna	Audio & Video	3	02-28-2010 10:24 AM
Engine output graph	gumpy	Engine & Drivetrain	10	02-10-2010 06:31 AM
Pioneer AVIC-Z110BT and ND-BC2 installed	tzgq2m	Audio & Video	23	11-05-2009 12:26 AM
Touring Package sub output?	FricFrac	Audio & Video	4	07-15-2009 03:58 PM

05-05-2010, 11:13 AM	#3 (permalink)
jagodago Base Member Join Date: Oct 2009 Location: Austin, Tx Posts: 14 Drives: 09-370Z-Black-7spd Rep Power: 16	Well the speakers are 4 ohm and the amp is rated down to 2 so I am good there. the input side of the it amp is rated at 10k and I have found nothing on the z110bt to show what it is. I would assume that if it was a reflection issue I would hear distortion across the pre-amp gain range, it seems that when I am hitting the pre-amp harder distorts more. I have the HU pulled and plan on sending it in to Pioneer. One thing I plan on doing is buying a 3.5mm to RCA cable and trying to run the amp off of my ipod just to see if I can hear distortion. I'm not ruling out the amp or cross overs but I have no real way of checking it.