Nismo audio upgrade- critique my planned setup

Originally Posted by 2fast4thelaw

Dont worry about blowing them. Just use the 24/db octive slope and set them around 70Hz and you will be fine. Focals are extreamly consertatively rated. Thier max rms rating is what I would consider a starting point.

Just wire the mid woofers and tweeters as normal and bridge the main 4 channels of the amp to the passive crossovers and set your crossover as stated above.

The dash is easiest place to mount the tweeters and they work very well there. I like what Big-A did with gutting the stock tweets and mounting the new tweeters inside the frame. No need to have them baffled since they are self contained. Set all gains at about 10:00 o-clock on the 900/5 to start with.

Originally Posted by 2fast4thelaw

only if you want to feed them 100 watts per channel. I would bridge the front and rear channels together. To do this look at your amplifier speaker outputs and it will show you what to connect. Its usually something like (Rt-Front +pos and Rt-Rear -neg and Lt-Front +pos and Lt-Rear - neg) This will yield you 50% more power to your fronts.