Thank you bigaudiofanat

redondoaveb

I just installed a Sony head unit to replace the crappy Bose unit. I had some issues with the wiring for the Axxess ASWC-1. Between watching bigaudiofanat's youtube video, a few email questions to bigaudiofanat and new updated wiring diagram from Crutchfield it works perfect now. Just wanted to say thanks to Matt, I appreciate him taking the time to answer a bunch of questions for me.

ard978

"new" wiring diagram?

redondoaveb

The Axxess wiring diagram showed using pin 6 for the gray/blue wire, pin 16 for the gray/red wire and pin 15 for black (ground). That was incorrect on my car (2017). Crutchfield sent me a copy of the Nissan fsm wiring diagram. It showed pin 4, pin 13 and pin 14 as the steering wheel control wiring. I knew that was correct by bigaudiofanat's video because those wires weren't connected to anything on the head unit side of the connector. If I would have used the Axxess diagram I would have tied into the amplifier pre out wiring.

DrNumbers

Any chance I could get you to post that wiring diagram?

redondoaveb

Sorry for the late reply, I didn't see your post. Here's the section of the fsm that applies to the steering wheel control wiring and the ASWC-1.

Attached Images

	SSCN0584.JPG (137.7 KB, 16 views)
	SSCN0585.JPG (138.6 KB, 16 views)

ChopsZ

In the older 370's...

Black to Black
Gray/Blue to Blue
Gray/Red to Pink



On my 2016...

Black to Black
Gray/Blue to Gray
Gray/Red to White

__________________
She's For Sale! PERFORMANCE: Aero Workz | Akebono | BC Racing | EcuTek | HKS | MaxBore | Motordyne | Nismo | RJM | SPL | StopTech | Z1
AUDIO: Arc Audio | Bazooka | Helix | Pioneer | Stereo Integrity

DrNumbers

No worries. I appreciate the help. Thanks!

redondoaveb

I saw the post of yours on your new stereo install that Bespoke did for you. Very nice. As soon as get my suspension work completed in the next week or so I'm going to have to hit him up and have him do mine. I believe he's in Marina del Rey isn't he, I'm in Redondo Beach so it shouldn't be too much of drive for him.

DrNumbers

Awesome! He is in Marina del Ray so it should be a quick drive over for him to Redondo. I'm still surprised he drove out to Orange as many times as he did to meet with me before the install even began. I even offered to drive over to him a couple times, but he insisted on coming to me. I'm sure you'll be happy with his work. I kept the OEM look, but I know he'll do custom work too. I'm still blown away at how good the system sounds, and my wife is too. She got teary eyed a couple of days ago listening to Tori Amos

Seems like you've been modding the heck out of your car. I know we came on the forum at about the same time. When are you going to post pics?

redondoaveb

I definitely need to give him a call, you're obviously really happy with his work. Nice to find someone you can trust, there are too many butchers out there. Here is one pic showing the my powder coated wheels, window tint and a little bit of wrap that was done. Most of my mods so far have been mechanical (can't see them).

Attached Images

SSCN0522.JPG (140.6 KB, 16 views)

redondoaveb

Here's a short video showing the headlight mod I had done also.
https://youtu.be/59dG_ogM6iU

DrNumbers

Lookin good man. That headlight mod is pretty sick.

redondoaveb

Thanks. They did a great job on the headlights.

bigaudiofanat

My pleasure sir, glad I could be of assistance.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

BC416

Matt is the man. Installed my head-unit and steering wheel controls. No problems to this day. Anytime someone has issues with audio/video on here, I point them his way.

__________________
F.I. / K&N / 180 / Forgestar