Thank you bigaudiofanat

ard978 · 07-01-2017, 12:24 PM

"new" wiring diagram?

redondoaveb · 07-01-2017, 12:41 PM

Quote:

Originally Posted by ard978

"new" wiring diagram?

The Axxess wiring diagram showed using pin 6 for the gray/blue wire, pin 16 for the gray/red wire and pin 15 for black (ground). That was incorrect on my car (2017). Crutchfield sent me a copy of the Nissan fsm wiring diagram. It showed pin 4, pin 13 and pin 14 as the steering wheel control wiring. I knew that was correct by bigaudiofanat's video because those wires weren't connected to anything on the head unit side of the connector. If I would have used the Axxess diagram I would have tied into the amplifier pre out wiring.

DrNumbers · 07-15-2017, 12:02 PM

Any chance I could get you to post that wiring diagram?

redondoaveb · 07-23-2017, 07:59 PM

Sorry for the late reply, I didn't see your post. Here's the section of the fsm that applies to the steering wheel control wiring and the ASWC-1.

DrNumbers · 07-23-2017, 09:39 PM

Quote:

Originally Posted by redondoaveb

Sorry for the late reply, I didn't see your post. Here's the section of the fsm that applies to the steering wheel control wiring and the ASWC-1.

No worries. I appreciate the help. Thanks!

redondoaveb · 07-23-2017, 09:54 PM

Quote:

Originally Posted by DrNumbers

No worries. I appreciate the help. Thanks!

I saw the post of yours on your new stereo install that Bespoke did for you. Very nice. As soon as get my suspension work completed in the next week or so I'm going to have to hit him up and have him do mine. I believe he's in Marina del Rey isn't he, I'm in Redondo Beach so it shouldn't be too much of drive for him.

DrNumbers · 07-24-2017, 12:40 AM

Awesome! He is in Marina del Ray so it should be a quick drive over for him to Redondo. I'm still surprised he drove out to Orange as many times as he did to meet with me before the install even began. I even offered to drive over to him a couple times, but he insisted on coming to me. I'm sure you'll be happy with his work. I kept the OEM look, but I know he'll do custom work too. I'm still blown away at how good the system sounds, and my wife is too. She got teary eyed a couple of days ago listening to Tori Amos

Seems like you've been modding the heck out of your car. I know we came on the forum at about the same time. When are you going to post pics?

07-15-2017, 12:02 PM	#3 (permalink)
DrNumbers Base Member Join Date: Mar 2017 Location: SoCal Posts: 71 Drives: 2016 370Z Rep Power: 10	Any chance I could get you to post that wiring diagram? simul8r likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Happy Birthday BigAudioFanat(ic)!!!	DeEePiDDy	The Lounge (Off Topic)	6	07-02-2013 03:02 PM
Does anybody know how to wire a Alpine pdx-5 (other than bigaudiofanat)	Baer383	Audio & Video	27	09-24-2010 09:20 PM

07-01-2017, 12:24 PM	#1 (permalink)
ard978 Base Member Join Date: Mar 2012 Location: Charlotte Posts: 5 Drives: 2013 370Z Rep Power: 15	"new" wiring diagram?

07-24-2017, 12:40 AM	#7 (permalink)
DrNumbers Base Member Join Date: Mar 2017 Location: SoCal Posts: 71 Drives: 2016 370Z Rep Power: 10	Awesome! He is in Marina del Ray so it should be a quick drive over for him to Redondo. I'm still surprised he drove out to Orange as many times as he did to meet with me before the install even began. I even offered to drive over to him a couple times, but he insisted on coming to me. I'm sure you'll be happy with his work. I kept the OEM look, but I know he'll do custom work too. I'm still blown away at how good the system sounds, and my wife is too. She got teary eyed a couple of days ago listening to Tori Amos Seems like you've been modding the heck out of your car. I know we came on the forum at about the same time. When are you going to post pics?