My sub 2.0

dvboy · 01-18-2017, 10:00 PM

A year ago in made and installed an 8" sub in my car,liked the fact that it fit under the cargo cover and was easily removed if needed.The bass was nice and tight,but out of boredom one day I ordered a shallow mount Sundown SD-3 sub for a little fuller sound.My intention was to also make it fit under the cargo cover,doing the math its going to be tight with the magnet being 1/8" away from the bottom of the box,and the driver being 1 1/4" away from the cover at the top.Its turning out quite well,still not carpeted or fully mounted,but have progress pics and will update when completed.Not sure,but I can't recall seeing a 10" sub that fit under the cover,so its definitely possible.
FullSizeRender.jpg

IMG_1610.jpg

IMG_1611.jpg

_MG_0128.jpg

_MG_0130.jpg

_MG_0132.jpg

_MG_0134.jpg

Jayhovah · 01-19-2017, 10:14 AM

Looks really clean! That's a 10"? (Wasn't sure from the OP)

Knockoutpie · 01-19-2017, 12:13 PM

Looks good. Not sure how I feel about the magnet being so close to the bottom though. For practice I try and keep at least an inch. Will follow this post though. Good stuff.

dvboy · 01-19-2017, 05:17 PM

Quote:

Originally Posted by Knockoutpie

Looks good. Not sure how I feel about the magnet being so close to the bottom though. For practice I try and keep at least an inch. Will follow this post though. Good stuff.

The magnet has no vent hole in the middle and is designed to be actually touching the back wall if needed.

dvboy · 01-19-2017, 09:54 PM

Quote:

Originally Posted by Jayhovah

Looks really clean! That's a 10"? (Wasn't sure from the OP)

Yes,I wasn't clear,but it is a 10" sealed sub in a 0.50 cu/ft enclosure.Hopefully I have it all done this weekend.

Knockoutpie · 01-20-2017, 09:10 AM

I'm not impressed until you get a 15" under there.

dvboy · 01-21-2017, 06:25 PM

Got er all done.As expected it sounds deeper and fuller than my JL 8" sub,but not quite as tight.I am a believer that drivers need time to break in,so I hoping it will get as tight at my 8" over time.Overall I'm happy with the results

_MG_0138.jpg

_MG_0136.jpg

YzGyz · 01-21-2017, 09:27 PM

Quote:

Originally Posted by dvboy

Got er all done.As expected it sounds deeper and fuller than my JL 8" sub,but not quite as tight.I am a believer that drivers need time to break in,so I hoping it will get as tight at my 8" over time.Overall I'm happy with the results

Attachment 119467

Attachment 119468

I take it you are a believer that the more you pound singing the tighter it gets.

YzGyz

dvboy · 01-25-2017, 05:22 PM

I finally got it sounding the way I like.Trying a few different volumes of insulation in the enclosure I got it to sound tight and musical,won't win any SPL competitions but fills my needs.Insulation really can change the sound of a sealed sub.

01-18-2017, 10:00 PM	#1 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	My sub 2.0 A year ago in made and installed an 8" sub in my car,liked the fact that it fit under the cargo cover and was easily removed if needed.The bass was nice and tight,but out of boredom one day I ordered a shallow mount Sundown SD-3 sub for a little fuller sound.My intention was to also make it fit under the cargo cover,doing the math its going to be tight with the magnet being 1/8" away from the bottom of the box,and the driver being 1 1/4" away from the cover at the top.Its turning out quite well,still not carpeted or fully mounted,but have progress pics and will update when completed.Not sure,but I can't recall seeing a 10" sub that fit under the cover,so its definitely possible. FullSizeRender.jpg IMG_1610.jpg IMG_1611.jpg _MG_0128.jpg _MG_0130.jpg _MG_0132.jpg _MG_0134.jpg Smashley, dotcomee and Kris2fer like this. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

01-21-2017, 06:25 PM	#7 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	Got er all done.As expected it sounds deeper and fuller than my JL 8" sub,but not quite as tight.I am a believer that drivers need time to break in,so I hoping it will get as tight at my 8" over time.Overall I'm happy with the results _MG_0138.jpg _MG_0136.jpg __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

01-25-2017, 05:22 PM	#9 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	I finally got it sounding the way I like.Trying a few different volumes of insulation in the enclosure I got it to sound tight and musical,won't win any SPL competitions but fills my needs.Insulation really can change the sound of a sealed sub. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

01-19-2017, 12:13 PM	#3 (permalink)
Knockoutpie Base Member Join Date: Jun 2016 Location: Gilbert Arizona Posts: 93 Drives: 2013 370z Sport Rep Power: 8	Looks good. Not sure how I feel about the magnet being so close to the bottom though. For practice I try and keep at least an inch. Will follow this post though. Good stuff.

01-20-2017, 09:10 AM	#6 (permalink)
Knockoutpie Base Member Join Date: Jun 2016 Location: Gilbert Arizona Posts: 93 Drives: 2013 370z Sport Rep Power: 8	I'm not impressed until you get a 15" under there.