Axxess ASWC

zefaulter

Another one of those threads where ASWC-1 doesn't seem to work

I have read through all the threads I could find including the one sticky above.

I have 2010 with BOSE and non-Nav. I did not do the bluetooth wire in the trunk, the wires were not the same as DIY so I skipped that(This is now completed as well).

A question and a couple of issues:

• Do you re-install stock amp behind HU after upgrade? (What I was thinking of end up being the HVAC control module so that had to go back in of course)

• During Bluetooth call, there is no sound coming from speakers, Microphone seems to work. Bluetooth steaming works fine.(Fixed... had the 4 wires incorrectly plugged in at the back of HU)

• ASWC-1 sees both wires connected through green LED Blink test(red/grey and blue/grey). During initial boot auto program changes volume. Once HU is detected with 6 red blinks, it goes to RED-GREEN cycle. No button works.
  (Fixed...It doesn't matter if ASWC sees connections if it is connected to wrong wire on the other side. According to nissan service manual I had wires all wrong)

I created this for BOSE owners without Navigation. Year model 2009-2011. It is for Audio Control module in the trunk next to amp. Follow this DIY: DIY: AXXESS steering wheel control (phone)