Need help with jumper pins on LC2i.

Navster · 04-08-2015, 11:27 PM

manually split the signal wires coming in - so take one pair of +/- into the left channel and split over to the right. You could really just use some short wires to take the signal from the left channel screw terminal and plug those into the right channel.

AccuBASS is not the overall bass output for the LC2i - it is an EQ. AccuBASS should be dialed in to taste, then the output level of the LC2i is controlled by the ACR-1 once you've dialed in the Bass level. AccuBASS Level and Bass Level are different. Bass Level is the knob that controls the output at the Bass RCAs on the LC2i. AccuBASS, again, is the EQ adjustment made to your signal.

This is what I got from the tech

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LC2i Settings?	a6walter1	Audio & Video	8	04-13-2015 11:12 PM
Hood pins installation help	edliaszenik	Exterior & Interior	1	01-16-2015 06:45 AM
ECU pins for Ignition Coils	pokeyl	Nissan 370Z General Discussions	1	04-08-2014 01:06 PM
Hood pins needed?	bldg636	Exterior & Interior	4	07-14-2013 06:27 PM
Top Secret Aerocatch locking hood pins	SOLISIMO	Parts for sale (Private Classifieds)	5	03-14-2010 08:53 PM

04-08-2015, 11:27 PM	#8 (permalink)
Navster Base Member Join Date: Jun 2014 Location: Vancouver Posts: 94 Drives: 10 Nissan 370z anniv Rep Power: 13	manually split the signal wires coming in - so take one pair of +/- into the left channel and split over to the right. You could really just use some short wires to take the signal from the left channel screw terminal and plug those into the right channel. AccuBASS is not the overall bass output for the LC2i - it is an EQ. AccuBASS should be dialed in to taste, then the output level of the LC2i is controlled by the ACR-1 once you've dialed in the Bass level. AccuBASS Level and Bass Level are different. Bass Level is the knob that controls the output at the Bass RCAs on the LC2i. AccuBASS, again, is the EQ adjustment made to your signal. This is what I got from the tech