View Single Post
Old 04-08-2015, 10:27 PM   #8 (permalink)
Navster
Base Member
 
Navster's Avatar
 
Join Date: Jun 2014
Location: Vancouver
Posts: 94
Drives: 10 Nissan 370z anniv
Rep Power: 10
Navster is on a distinguished road
Default

manually split the signal wires coming in - so take one pair of +/- into the left channel and split over to the right. You could really just use some short wires to take the signal from the left channel screw terminal and plug those into the right channel.

AccuBASS is not the overall bass output for the LC2i - it is an EQ. AccuBASS should be dialed in to taste, then the output level of the LC2i is controlled by the ACR-1 once you've dialed in the Bass level. AccuBASS Level and Bass Level are different. Bass Level is the knob that controls the output at the Bass RCAs on the LC2i. AccuBASS, again, is the EQ adjustment made to your signal.


This is what I got from the tech
Navster is offline   Reply With Quote