After getting gas, my gauge reads one dot below full

NickBaragona · 03-12-2012, 10:01 AM

Has anybody else experienced this problem? I can't seem to get my Z to completely fill up. It always stops one dot below full...I don't recall it doing this when I first bought the car last summer .

TerribleONE · 03-12-2012, 10:04 AM

Search is your friend!! There are multiple threads on this issue

Spikuh · 03-12-2012, 10:11 AM

Quote:

Originally Posted by terribleone

search is your friend!! There are multiple threads on this issue

qft!!!

TerribleONE · 03-12-2012, 10:13 AM

Fuel Gauge Not Lighting All The Way UP

NickBaragona · 03-12-2012, 10:14 AM

Thanks, I was unsuccesful with a search, but now see there have been several threads on this issue.

TerribleONE · 03-12-2012, 10:17 AM

It actually took me a minute or two to pull this up. No worries!

Masa · 03-12-2012, 11:04 AM

I've only had this happen to me when it was cold out when I filled up. Now that the weather has warmed up quite a bit it reads normal again.

ImportConvert · 03-12-2012, 01:43 PM

I have not yet had this occur. It stays full for a good while, too.

kenchan · 03-12-2012, 02:10 PM

my G does this too... i can rarely get it up to full on the indicator. depends on the angle of dispenser nozzle and pour rate of the pump.

03-12-2012, 10:01 AM	#1 (permalink)
NickBaragona Enthusiast Member Join Date: Jun 2011 Location: Maryland Posts: 360 Drives: 40th 370Z Rep Power: 15	After getting gas, my gauge reads one dot below full Has anybody else experienced this problem? I can't seem to get my Z to completely fill up. It always stops one dot below full...I don't recall it doing this when I first bought the car last summer .

03-12-2012, 10:04 AM	#2 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5852	Search is your friend!! There are multiple threads on this issue __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-12-2012, 10:13 AM	#4 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5852	Fuel Gauge Not Lighting All The Way UP __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-12-2012, 10:17 AM	#6 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5852	It actually took me a minute or two to pull this up. No worries! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-12-2012, 11:04 AM	#7 (permalink)
Masa A True Z Fanatic Join Date: Feb 2011 Location: Annapolis, MD Posts: 2,237 Drives: Family Cars Rep Power: 22	I've only had this happen to me when it was cold out when I filled up. Now that the weather has warmed up quite a bit it reads normal again. __________________ BMW 340i Jeep Cherokee Trailhawk

03-12-2012, 10:14 AM	#5 (permalink)
NickBaragona Enthusiast Member Join Date: Jun 2011 Location: Maryland Posts: 360 Drives: 40th 370Z Rep Power: 15	Thanks, I was unsuccesful with a search, but now see there have been several threads on this issue.

03-12-2012, 01:43 PM	#8 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7628	I have not yet had this occur. It stays full for a good while, too.

03-12-2012, 02:10 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	my G does this too... i can rarely get it up to full on the indicator. depends on the angle of dispenser nozzle and pour rate of the pump.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Gas Gauge Never Full	dinfire	Nissan 370Z General Discussions	27	02-08-2013 07:40 PM
Last LED on gas gauge won't light up when full	SVTNate	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-24-2011 09:51 PM
Gas gauge not showing full...	WingnutInAV	Southern California Region	9	08-23-2011 05:09 PM
Anyone else have their gas gauge stuck on Full?	VCuomo	Nissan 370Z General Discussions	21	11-04-2010 07:45 PM
What up, who reads these?	ZforMe	New Forum Member	11	01-18-2009 09:12 PM