Nissan 370Z Forum - View Single Post - SPL Rear Hub & Upper Arm Bushings Install

Rusty · 10-29-2020, 12:25 AM

I used a hole saw and cut the inner bushings out. Then used a hack saw blade and cut the outer shell to remove it. I used a ball joint press to install the bushings. It only took me about 4 hours to do both sides. Here's my thread on it.

The Complete SPL Rear Suspension (Almost)

10-29-2020, 12:25 AM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,877 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I used a hole saw and cut the inner bushings out. Then used a hack saw blade and cut the outer shell to remove it. I used a ball joint press to install the bushings. It only took me about 4 hours to do both sides. Here's my thread on it. The Complete SPL Rear Suspension (Almost) __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html