1st pic is the stock traction arm and the SPL traction arm. I adjusted the SPL arm the same length as the stock arm. I did this by putting a bolt through the holes to align it up. The SPL arm comes with 3 bushings for the heim joint. You only need to use 2. It depends on the frame mount style.
2nd and 3rd pic's are the camber arms. I adjusted the length the same way as the traction arms. In this pics. You can see the lock-out bolts.
If you are just installing these two items. Should only take you about 2~3 hours depending on your skills. Plus alignment.
Last edited by Rusty; 10-31-2017 at 11:17 AM.
|