Work Gnosis HS203

GURJEEZY

Kenchan, Didn't you run a 19 X 10.5 +15 in rear in the past? I remember one of your posts saying that. And a 19 X 9 +38 with 5mm spacer. How did that look? Should I do 9.5 +38 in front? to be closer to your fronts?

kenchan

that's my weds setup with the 10.5 ET15 on the rear. 9.5 ET38 will look pretty much like my 9 ET33 setup if that's wat you want.

when i bought the weds i originally ordered the rear 10.5 ET24, but the store sent me
10.5 ET15's by mistake. they were fine to send me ET24 replacements, but since
the 10.5's fit better inwards vs 10 at ET15, i just kept them for variety's sake.

i personally think the stock 19x10 at ET15 looks weird. too narrow and too
flush to rear arch.

honestly the best fit on stock height for base is the nismo's running 285/35/19
on the rear, RE11's.

GURJEEZY

Thanks Kenchan, I have got a lot of tips from your posts.

I am thinking of going with 19x9.5 +35 and 19x10.5 +18. that would basically look like the nismo wheels (fitment wise) with 5mm spacers all around. What do you think about that set up?

If you added any size of spacers to front and rear on your nismo wheels what would you do?

kenchan

nismo setup is 9.5 ET40 and 10.5 ET23 so yah, you will be a tad more aggressive. should look good.
just make sure to get good tires, not some pos.

vividracing

__________________

GURJEEZY

Thanks Ralph for all the information you gave me on these wheels. I will say that Ralph at Vivid Racing has gave me the best price out of several other work wheel dealers that I myself have contacted. Great customer service.