Another shaking steering wheel thread.

rinaudo · 05-27-2014, 07:26 PM

I bought the car with slight shake while braking. Recently I put a set of bolt on spacers by power by max on the car(pbm). I have 20mm on the rear and 22mm on the front. I have shaved down the factory studs so they don't stick out from the spacer and re seated the spacers a few times. But I still have a pretty bad steering wheel shake at 45mph and up. I ordered some new rotors and pads today for the front so I will try that. I also has the wheels rebalanced and I've had a alignment within the last 5k miles. Any input from you guys is greatly appreciated.

roy'sz · 05-27-2014, 07:45 PM

Since you shaved the studs down they are no longer ballanced...thus explaining the imbalances.

Antistupid · 05-27-2014, 08:35 PM

I clicked on this thinking I could read about the issue as my 09' sport just started the same thing during light breaking. Goes away at heavy breaking.

Stock everything and I had a local shop check the wheel balancing... guess Ill bring it to another

rinaudo · 05-27-2014, 09:31 PM

Quote:

Originally Posted by roy'sz

Since you shaved the studs down they are no longer ballanced...thus explaining the imbalances.

did it before i shaved the studs. the exact same way

SouthArk370Z · 05-27-2014, 09:46 PM

Probably one of the rotors is glazed or warped. If you still have the shake after replacing the rotors, then you may have a steering linkage problem.

rinaudo · 05-27-2014, 09:57 PM

Quote:

Originally Posted by SouthArk370Z

Probably one of the rotors is glazed or warped. If you still have the shake after replacing the rotors, then you may have a steering linkage problem.

yeah thats what im thinking... once i get the rotors in and install them ill let you guys know if anything has changed. im just thinking that if it was a warped rotor that by adding spacers im only going to amplfy the problem by having the wheel further out. maybe i sound stupid but its just a thought

SouthArk370Z · 05-27-2014, 10:08 PM

It could be a bunch of things. Glaze on the rotor is just the most common cause.

The spacers may make things worse but not as much as you might think. Depends on what is causing the vibration.

Check again after replacing the rotors/pads. If the vibration disappears, you can pretty well bet that one of the rotors was the problem.

While you have the rotors off would be a good time to check the steering out. Look for any bent or scraped up parts. Grab everything you can and see if you can feel any looseness.

Fountainhead · 05-28-2014, 09:28 AM

If your old rotors are OK to be turned, I'd have them turned so that the next time this happens, you have immediate replacements. Only if the old rotors are thick enough to be turned/have high spots removed.

kenchan · 05-28-2014, 09:45 AM

Quote:

Originally Posted by rinaudo

yeah thats what im thinking... once i get the rotors in and install them ill let you guys know if anything has changed. im just thinking that if it was a warped rotor that by adding spacers im only going to amplfy the problem by having the wheel further out. maybe i sound stupid but its just a thought

not stupid at all. that's probably wat is happening.

cutting the stock studs in equal lenghts should not cause vibrations.

DEpointfive0 · 05-28-2014, 09:55 AM

Quote:

Originally Posted by roy'sz

Since you shaved the studs down they are no longer ballanced...thus explaining the imbalances.

Quote:

Originally Posted by rinaudo

yeah thats what im thinking... once i get the rotors in and install them ill let you guys know if anything has changed. im just thinking that if it was a warped rotor that by adding spacers im only going to amplfy the problem by having the wheel further out. maybe i sound stupid but its just a thought

The weight of studs is extremely close to the hub, it won't cause vibrations, also, I don't believe brake rotors are balanced either.

In any case, IF that was the problem, the car would shimmy at speed, not JUST during braking

rinaudo · 05-28-2014, 08:44 PM

In any case, IF that was the problem, the car would shimmy at speed, not JUST during braking[/QUOTE]

Well the car does shake at any speed above 40 mph and when I touch the brakes it gets worse. Lol there are just too many things it could be

zefaulter · 05-28-2014, 09:13 PM

I'd like to find our if your rotors will get rid of the brake vibration at least. Subbed for result

rinaudo · 05-31-2014, 03:26 PM

So i replaced the rotors and pads today and it fixed the vibration while braking. The vibration in the car and steering wheel is still there at higher speeds. I did notice that there is some play in my front passenger hub bearing. So it seems that is next. Where would you guys buy a bearing or a hub/bearing assembly from?

SouthArk370Z · 05-31-2014, 05:16 PM

For bearings, most auto parts stores will have what you need. I try to get bearings made by SKF, Timken, or Fafnir, but I'm sure there are other good brands out there.

For the hub, you may have to go to Nissan.

rinaudo · 06-29-2014, 08:17 PM

I replaced the hub and bearing but I still have the damn shake. Really sucks that I can't figure this one out lol

05-27-2014, 07:26 PM	#1 (permalink)
rinaudo Base Member Join Date: May 2012 Location: louisiana Posts: 60 Drives: 09 pw 370z Rep Power: 12	Another shaking steering wheel thread. I bought the car with slight shake while braking. Recently I put a set of bolt on spacers by power by max on the car(pbm). I have 20mm on the rear and 22mm on the front. I have shaved down the factory studs so they don't stick out from the spacer and re seated the spacers a few times. But I still have a pretty bad steering wheel shake at 45mph and up. I ordered some new rotors and pads today for the front so I will try that. I also has the wheels rebalanced and I've had a alignment within the last 5k miles. Any input from you guys is greatly appreciated.

05-27-2014, 07:45 PM	#2 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 15	Since you shaved the studs down they are no longer ballanced...thus explaining the imbalances. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

05-27-2014, 09:46 PM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Probably one of the rotors is glazed or warped. If you still have the shake after replacing the rotors, then you may have a steering linkage problem. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-27-2014, 10:08 PM	#7 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	It could be a bunch of things. Glaze on the rotor is just the most common cause. The spacers may make things worse but not as much as you might think. Depends on what is causing the vibration. Check again after replacing the rotors/pads. If the vibration disappears, you can pretty well bet that one of the rotors was the problem. While you have the rotors off would be a good time to check the steering out. Look for any bent or scraped up parts. Grab everything you can and see if you can feel any looseness. DEpointfive0 and falconfixer like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-31-2014, 05:16 PM	#14 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	For bearings, most auto parts stores will have what you need. I try to get bearings made by SKF, Timken, or Fafnir, but I'm sure there are other good brands out there. For the hub, you may have to go to Nissan. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-27-2014, 08:35 PM	#3 (permalink)
Antistupid Base Member Join Date: Oct 2013 Location: NOLA Posts: 51 Drives: 09' 370Z 6MT Rep Power: 11	I clicked on this thinking I could read about the issue as my 09' sport just started the same thing during light breaking. Goes away at heavy breaking. Stock everything and I had a local shop check the wheel balancing... guess Ill bring it to another

05-28-2014, 09:28 AM	#8 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	If your old rotors are OK to be turned, I'd have them turned so that the next time this happens, you have immediate replacements. Only if the old rotors are thick enough to be turned/have high spots removed.

05-28-2014, 08:44 PM	#11 (permalink)
rinaudo Base Member Join Date: May 2012 Location: louisiana Posts: 60 Drives: 09 pw 370z Rep Power: 12	In any case, IF that was the problem, the car would shimmy at speed, not JUST during braking[/QUOTE] Well the car does shake at any speed above 40 mph and when I touch the brakes it gets worse. Lol there are just too many things it could be

05-28-2014, 09:13 PM	#12 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	I'd like to find our if your rotors will get rid of the brake vibration at least. Subbed for result

05-31-2014, 03:26 PM	#13 (permalink)
rinaudo Base Member Join Date: May 2012 Location: louisiana Posts: 60 Drives: 09 pw 370z Rep Power: 12	So i replaced the rotors and pads today and it fixed the vibration while braking. The vibration in the car and steering wheel is still there at higher speeds. I did notice that there is some play in my front passenger hub bearing. So it seems that is next. Where would you guys buy a bearing or a hub/bearing assembly from?

06-29-2014, 08:17 PM	#15 (permalink)
rinaudo Base Member Join Date: May 2012 Location: louisiana Posts: 60 Drives: 09 pw 370z Rep Power: 12	I replaced the hub and bearing but I still have the damn shake. Really sucks that I can't figure this one out lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
steering wheel shaking after installing h&r springs and proj kics spacers	rtung87	Wheels & Tires	5	01-30-2014 04:30 PM
Shaking Steering Wheel - Dealership Problem - I am going to donate money	John_Kay	Wheels & Tires	10	12-26-2013 03:46 PM
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 10:23 PM
spacer install and steering wheel shaking	scottnismo	Wheels & Tires	19	01-20-2012 06:05 PM
Retrofitting nav steering wheel buttons onto non-nav steering wheel?	ghostbusters	Exterior & Interior	2	10-11-2011 11:27 AM