Wheel locks

370zFTW · 02-23-2014, 10:02 AM

Hey guys I know this had been posted thousand times.

But my 13' Z with the Rays wheels did not come with wheel locks...I am wanting to know if anyone knows where I can get OEM wheel locks or if this picture below will fit my Rays wheels???

Sent from my iPhone using Tapatalk

JARblue · 02-23-2014, 10:07 AM

I like those - never seen them before.

I cannot say for sure. While they do appear to have the acorn tapered style that is required for the OEM wheels, I'm not convinced the taper is large enough. If you can check the dimensions of them, there is an image somewhere on this forum with the stock lug nut dimensioned for comparison.

You can get OEM wheel locks from some vendors (dealers) here on the forum or your local dealer. I purchased mine from a fellow forum member.

370zFTW · 02-23-2014, 10:12 AM

Quote:

Originally Posted by JARblue

I like those - never seen them before.

I cannot say for sure. While they do appear to have the acorn tapered style that is required for the OEM wheels, I'm not convinced the taper is large enough. If you can check the dimensions of them, there is an image somewhere on this forum with the stock lug nut dimensioned for comparison.

You can get OEM wheel locks from some vendors (dealers) here on the forum or your local dealer. I purchased mine from a fellow forum member.

Here's the dimensions
Brand- Gorilla
Style- Factory/OEM Nissan/Infinity Mag Seat Style Locks
Seat-
Finish- Chrome
Material- Hardened Steel
Thread Size- 12x1.25
Drive- 13/16" , 21mm
Overall Length in Inches- 1.54
Overall Width in Inches-
Shank Length in Inches- 0.55
Shank Width in Inches- 0.725

I would get OEM from vendors here but when I PM them they won't see their messages or takes too long to reply lol.

I found these also. These look like it'll fit???

Sent from my iPhone using Tapatalk

JARblue · 02-23-2014, 10:17 AM

That shank is not big enough... I'm not sure anything but OEM lugs and locks can be used on OEM wheels.

JARblue · 02-23-2014, 10:17 AM

For image comparison, here are the OEM ones:

370zFTW · 02-23-2014, 10:19 AM

Quote:

Originally Posted by JARblue

For image comparison, here are the OEM ones:

Hmm this will work? Looks like the same size as OEM ones but it's wheel locks.

Sent from my iPhone using Tapatalk

JARblue · 02-23-2014, 10:20 AM

Quote:

Originally Posted by 370zFTW

Hmm this will work? Looks like the same size as OEM ones but it's wheel locks.

Those look very much like the OEM wheel locks I use.

370zFTW · 02-23-2014, 10:21 AM

Quote:

Originally Posted by JARblue

Those look very much like the OEM wheel locks I use.

I checked compatibility it says it'll fit

Sent from my iPhone using Tapatalk

JARblue · 02-23-2014, 10:22 AM

I see the watermark on the image appears to be an Infiniti dealership. I would guess that both Infiniti and Nissan have the same lug nuts, but I would want to double check for sure.

370zFTW · 02-23-2014, 10:24 AM

Ok. I'll message the seller and see. If all fails i may just order them online through Nissan. But thanks for your help!

Sent from my iPhone using Tapatalk

JARblue · 02-23-2014, 10:26 AM

kenchan · 02-23-2014, 11:30 AM

they should work.

the taper on the tip is for when you need to use your donuts. most steelies can use either ball or tapered types from past experience. the lugs look pretty stupid though cause it looks super huge vs standard taper/ball lugs when used on steelies.

hahaha but during a flat it's more about getting you home safely vs looks.

370zFTW · 02-23-2014, 11:31 AM

Quote:

Originally Posted by kenchan

they should work.

the taper on the tip is for when you need to use your donuts. most steelies can use either ball or tapered types from past experience. the lugs look pretty stupid though cause it looks super huge vs standard taper/ball lugs when used on steelies.

hahaha but during a flat it's more about getting you home safely vs looks.

Which wheel locks are you referring to? The gorilla ones or the OEM ones I posted pics of??

Sent from my iPhone using Tapatalk

kenchan · 02-23-2014, 12:43 PM

the aftermarket ones. when you get them compare the outer diameter with your factory lug. if they are the same should be no issue.

there's basically only 3 types of lugs for passenger cars:

washer type (like our oem) hubcentric wheel lugs
taper (acorn)
ball

370zFTW · 02-23-2014, 12:45 PM

Quote:

Originally Posted by kenchan

the aftermarket ones. when you get them compare the outer diameter with your factory lug. if they are the same should be no issue.

there's basically only 3 types of lugs for passenger cars:

washer type (like our oem) hubcentric wheel lugs
taper (acorn)
ball

Ok cool. Thanks guys for your help!

Sent from my iPhone using Tapatalk

02-23-2014, 10:02 AM	#1 (permalink)
370zFTW Base Member Join Date: May 2012 Location: Missouri Posts: 113 Drives: 2013 Nissan 370z Rep Power: 12	Wheel locks Hey guys I know this had been posted thousand times. But my 13' Z with the Rays wheels did not come with wheel locks...I am wanting to know if anyone knows where I can get OEM wheel locks or if this picture below will fit my Rays wheels??? Sent from my iPhone using Tapatalk

02-23-2014, 10:07 AM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I like those - never seen them before. I cannot say for sure. While they do appear to have the acorn tapered style that is required for the OEM wheels, I'm not convinced the taper is large enough. If you can check the dimensions of them, there is an image somewhere on this forum with the stock lug nut dimensioned for comparison. You can get OEM wheel locks from some vendors (dealers) here on the forum or your local dealer. I purchased mine from a fellow forum member. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-23-2014, 10:17 AM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	That shank is not big enough... I'm not sure anything but OEM lugs and locks can be used on OEM wheels. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-23-2014, 10:17 AM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	For image comparison, here are the OEM ones: __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-23-2014, 10:22 AM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I see the watermark on the image appears to be an Infiniti dealership. I would guess that both Infiniti and Nissan have the same lug nuts, but I would want to double check for sure. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-23-2014, 10:24 AM	#10 (permalink)
370zFTW Base Member Join Date: May 2012 Location: Missouri Posts: 113 Drives: 2013 Nissan 370z Rep Power: 12	Ok. I'll message the seller and see. If all fails i may just order them online through Nissan. But thanks for your help! Sent from my iPhone using Tapatalk

02-23-2014, 10:26 AM	#11 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	__________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-23-2014, 11:30 AM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	they should work. the taper on the tip is for when you need to use your donuts. most steelies can use either ball or tapered types from past experience. the lugs look pretty stupid though cause it looks super huge vs standard taper/ball lugs when used on steelies. hahaha but during a flat it's more about getting you home safely vs looks.

02-23-2014, 12:43 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	the aftermarket ones. when you get them compare the outer diameter with your factory lug. if they are the same should be no issue. there's basically only 3 types of lugs for passenger cars: washer type (like our oem) hubcentric wheel lugs taper (acorn) ball

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ray Wheel locks	Aizen Sosuke	Wheels & Tires	2	01-29-2012 11:37 AM
BEST Wheel Locks?	ShockWave	Wheels & Tires	1	01-04-2012 11:35 PM
Wheel Locks (Key)	OldGuy	Wheels & Tires	17	11-14-2011 08:12 PM
Are these the right wheel locks?	NXTAZEE	Wheels & Tires	21	11-04-2010 02:07 PM
BlackTop Wheel locks - Unconventional Wheel locks	Jeffblue	Wheels & Tires	13	07-07-2010 06:41 PM