wheel fitment question

Lothario · 02-21-2014, 12:21 PM

just for poops and giggles. any way to fit a set of

Bolt pattern: 5x112
Front size: 19x8.5 - 235/35/19 tire size
Rear size: 19x11 - 295/30/19 tire size

wheels on a 370? i think were 5x114 right? anyway to adapt them?

Chuck33079 · 02-21-2014, 01:09 PM

WheelAdapter.com > Wheel Adapters

Maybe these guys? I can't vouch for their quality, but they claim to make adapters for any pattern. Not sure what it would do to your offset, though.

Lothario · 02-21-2014, 01:15 PM

will that make the wheels stick out the sides and look stupid?

Chuck33079 · 02-21-2014, 01:17 PM

No idea. You didn't give the offset of the wheels and I didn't see the thickness of the adapter on their website.

Plus, you've got brake clearance to worry about in front.

To be honest, I'd just get wheels that fit without an adapter. The front you mentioned is too narrow anyway.

cooltoy · 02-21-2014, 02:02 PM

What are the offsets?

kenchan · 02-21-2014, 02:07 PM

Quote:

Originally Posted by cooltoy

What are the offsets?

very good question.

most pcd changing spacers start at like 25mm minimum.

cooltoy · 02-21-2014, 02:08 PM

I think you gave me a link at one time when I asked about converting a bolt pattern and the lowest that they had were 20 mm.

kenchan · 02-21-2014, 02:10 PM

Quote:

Originally Posted by cooltoy

I think you gave me a link at one time when I asked about converting a bolt pattern and the lowest that they had were 20 mm.

oh, was it 20? yah, they dont go too thin on those to maintain ridigity, i think.

i suppose if these are some REAL SPECIAL rare wheels, one could fabricate a pcd change on the hub and rotors... not sure if it's worth it though. ive seens some 4x100 guys convert to 5x114.3.

OMGWTFBBQ · 02-21-2014, 02:11 PM

Hub adapters are usually 15mm or thicker. Just get one that converts from 5x114.3 to 5x112 and you should be good. Subtract 15mm from your offset to get the final offset, so if it's +30 then your effective offset with the hub adapter is +15. Remember that the thinner the hub adapter, the more the original studs will poke out past the adapter so your wheels might have issues clearing the original studs depending on the design of the wheel.

No offense, but that is a retardedly narrow front wheel compared to the rear wheel. 2.5 inch stagger? WTF LOL

cooltoy · 02-21-2014, 02:12 PM

kenchan · 02-21-2014, 02:15 PM

Quote:

Originally Posted by OMGWTFBBQ

Hub adapters are usually 15mm. Just get one that converts from 5x114.3 to 5x112 and you should be good. Subtract 15mm from your offset to get the final offset, so if it's +30 then your effective offset with the hub adapter is +15.

No offense, but that is a retardedly narrow front wheel compared to the rear wheel. 2.5 inch stagger? WTF LOL

do they have pcd changing ones starting 15mm? i thought those were ticker, i could be wrong. ive not used those types.

8.5" actually isn't too bad considering 245/40/19 tires on the front.

but id be more concerned abou the design. typical 8.5" width wheels are kinda boring... unless it's like a flat spoke type. but then flat spokes dont really look all that great on our curvy cars.

OMGWTFBBQ · 02-21-2014, 02:38 PM

Project Kics has adapters for 5x100 to 5x114.3 starting at 15mm. That's what we're using to run 370z sized wheels on our widebody FRS.

It's convenient because I can swap wheels from my Z to our widebody s2000/widebody FRS/widebody FD3S RX7 since they all use the same width/offset/bolt pattern.

kenchan · 02-21-2014, 02:40 PM

Quote:

Originally Posted by OMGWTFBBQ

Project Kics has adapters for 5x100 to 5x114.3 starting at 15mm. That's what we're using to run 370z sized wheels on our widebody FRS.

It's convenient because I can swap wheels from my Z to our widebody s2000/widebody FRS/widebody FD3S RX7 since they all use the same width/offset/bolt pattern.

good info, OMGWTFBBQRSTUVWYZ

why is your name so long??!

cooltoy · 02-21-2014, 03:12 PM

Big hands?

kenchan · 02-21-2014, 03:13 PM

Big feet?

02-21-2014, 12:21 PM	#1 (permalink)
Lothario Enthusiast Member Join Date: May 2013 Location: florida Posts: 361 Drives: nikes Rep Power: 14	wheel fitment question just for poops and giggles. any way to fit a set of Bolt pattern: 5x112 Front size: 19x8.5 - 235/35/19 tire size Rear size: 19x11 - 295/30/19 tire size wheels on a 370? i think were 5x114 right? anyway to adapt them?

02-21-2014, 01:09 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	WheelAdapter.com > Wheel Adapters Maybe these guys? I can't vouch for their quality, but they claim to make adapters for any pattern. Not sure what it would do to your offset, though. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-21-2014, 01:17 PM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	No idea. You didn't give the offset of the wheels and I didn't see the thickness of the adapter on their website. Plus, you've got brake clearance to worry about in front. To be honest, I'd just get wheels that fit without an adapter. The front you mentioned is too narrow anyway. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-21-2014, 02:02 PM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365	What are the offsets? kenchan likes this.

02-21-2014, 02:11 PM	#9 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Hub adapters are usually 15mm or thicker. Just get one that converts from 5x114.3 to 5x112 and you should be good. Subtract 15mm from your offset to get the final offset, so if it's +30 then your effective offset with the hub adapter is +15. Remember that the thinner the hub adapter, the more the original studs will poke out past the adapter so your wheels might have issues clearing the original studs depending on the design of the wheel. No offense, but that is a retardedly narrow front wheel compared to the rear wheel. 2.5 inch stagger? WTF LOL Chuck33079 likes this. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale! Last edited by OMGWTFBBQ; 02-21-2014 at 02:14 PM.

02-21-2014, 01:15 PM	#3 (permalink)
Lothario Enthusiast Member Join Date: May 2013 Location: florida Posts: 361 Drives: nikes Rep Power: 14	will that make the wheels stick out the sides and look stupid?

02-21-2014, 02:08 PM	#7 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365	I think you gave me a link at one time when I asked about converting a bolt pattern and the lowest that they had were 20 mm.

02-21-2014, 02:12 PM	#10 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365

02-21-2014, 02:38 PM	#12 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Project Kics has adapters for 5x100 to 5x114.3 starting at 15mm. That's what we're using to run 370z sized wheels on our widebody FRS. It's convenient because I can swap wheels from my Z to our widebody s2000/widebody FRS/widebody FD3S RX7 since they all use the same width/offset/bolt pattern. kenchan likes this. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

02-21-2014, 03:12 PM	#14 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Big hands?

02-21-2014, 03:13 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Big feet?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question! about wheel fitment.	kentstuh	Wheels & Tires	14	12-20-2013 08:34 PM
wheel fitment	whiteZ34	Wheels & Tires	2	07-08-2013 07:38 PM
Wheel Fitment	js1	Wheels & Tires	3	03-21-2012 02:15 PM
Help with wheel fitment...	tbss370z	Wheels & Tires	0	12-06-2009 06:35 PM
Wheel fitment help...	zcoupe09	Wheels & Tires	1	11-22-2009 12:41 PM