wheel fitment question

OMGWTFBBQ

Hub adapters are usually 15mm or thicker. Just get one that converts from 5x114.3 to 5x112 and you should be good. Subtract 15mm from your offset to get the final offset, so if it's +30 then your effective offset with the hub adapter is +15. Remember that the thinner the hub adapter, the more the original studs will poke out past the adapter so your wheels might have issues clearing the original studs depending on the design of the wheel.

No offense, but that is a retardedly narrow front wheel compared to the rear wheel. 2.5 inch stagger? WTF LOL

__________________
Zele Performance | Varis | Powerhouse Amuse | Craftsquare | Tommy Kaira | Top Secret | HKS | Defi | Volk Racing | Cusco | SPL | Never ending build thread.. PM me if you have rare JDM parts for sale!

kenchan

do they have pcd changing ones starting 15mm? i thought those were ticker, i could be wrong. ive not used those types.

8.5" actually isn't too bad considering 245/40/19 tires on the front. but id be more concerned abou the design. typical 8.5" width wheels are kinda boring... unless it's like a flat spoke type. but then flat spokes dont really look all that great on our curvy cars.