Forgestar F14 - Lug Nuts

osbornsm · 11-21-2013, 10:27 AM

Those with Forgestar F14...

Are different / longer lugs required ?

...I heard somewhere that there's not enough threads to properly tighten down the lug nuts??

speedfreek · 11-21-2013, 10:33 AM

No, the stock lugs are fine and long enough.

Tribalpinoy91 · 11-21-2013, 06:37 PM

You probably read my post, after speaking with a employee at Z1 and gaining what little input i gathered here, it is not needed. The rep from Z1 said as long as there is at least a half inch of bolt exposed AFTER the wheel is mounted you are good to go.

^ The above conclusion confirms with members here as well. I was able to do 9, 360 degree rotations with the lug wrench.

Hope this helped. I prefer to understand the reasoning behind the simple "yes" and "no" that i've gotten

CHEERS!

ModBargains · 11-22-2013, 05:17 PM

If you have Forgestars, you want to make sure that the lugnuts you purchase are cone seat and have a thread pitch of 12mm x 1.25

Picture Reference for Seat Type:

Forgestar does carry plenty of lug nuts/ wheel bolts in their warehouse, so you can always add them to your order for $60.00.

Hope that clears things up!

-Frank

11-21-2013, 10:27 AM	#1 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 423	Forgestar F14 - Lug Nuts Those with Forgestar F14... Are different / longer lugs required ? ...I heard somewhere that there's not enough threads to properly tighten down the lug nuts?? __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

11-21-2013, 10:33 AM	#2 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	No, the stock lugs are fine and long enough. osbornsm likes this. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

11-21-2013, 06:37 PM	#3 (permalink)
Tribalpinoy91 Track Member Join Date: May 2012 Location: Las Vegas Posts: 607 Drives: 370z PW Rep Power: 13	You probably read my post, after speaking with a employee at Z1 and gaining what little input i gathered here, it is not needed. The rep from Z1 said as long as there is at least a half inch of bolt exposed AFTER the wheel is mounted you are good to go. ^ The above conclusion confirms with members here as well. I was able to do 9, 360 degree rotations with the lug wrench. Hope this helped. I prefer to understand the reasoning behind the simple "yes" and "no" that i've gotten CHEERS! osbornsm likes this.

11-22-2013, 05:17 PM	#4 (permalink)
ModBargains Track Member Join Date: Mar 2012 Location: La Habra, CA Posts: 916 Drives: Z Rep Power: 14	If you have Forgestars, you want to make sure that the lugnuts you purchase are cone seat and have a thread pitch of 12mm x 1.25 Picture Reference for Seat Type: Forgestar does carry plenty of lug nuts/ wheel bolts in their warehouse, so you can always add them to your order for $60.00. Hope that clears things up! -Frank osbornsm likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forgestar wheels, lug nuts	Read T	Wheels & Tires	6	11-09-2013 04:36 PM
////Forgestar is here!!	GetYourWheels	Tires/Wheels	166	05-06-2013 06:38 PM
Forgestar F14	jcr370	Wheels & Tires	23	08-22-2011 10:33 AM
Forgestar F05	Big J	Wheels & Tires	0	02-26-2011 02:44 AM
Forgestar F14	geterdone	Wheels & Tires	18	10-06-2010 08:18 PM