|
To much on the front for me. Rears perfect and flush. lowered you might rub on bumps and sharp turns. Here's the 30 and 22 offsets vs stock. Also with
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
11-22-2013, 10:33 PM
|
#3 (permalink) |
|
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3391   |
To much on the front for me. Rears perfect and flush. lowered you might rub on bumps and sharp turns.
Here's the 30 and 22 offsets vs stock. Also with a 10.5" wheel you can't run anything lower than 275 tire, which some people run but again being lowered not sure if you'll have issues. Plus the tires are added cost and imagine a spacer that large installed on your front with your OEM wheels. One member with OEM alignment numbers says he rubs on only a 245/40/19 with the same springs I believe. Now you can get a smaller diameter than him but you'll still be 30mm wider which again could rub. I have a 9.5" +25 stock alignment, stock springs and I stick out 1/8" past the fender. These wheels would push me another 8-16mm out which would look retarded. +30  +22 
__________________
13 370z- Last edited by synolimit; 11-22-2013 at 10:44 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help with Hoosier A6 sizing | gomer_110 | Track / Autocross / Drifting / Dragstrip | 8 | 10-20-2012 09:04 AM |
| Wheel sizing vs. power question | VegasZ | Wheels & Tires | 28 | 04-06-2012 01:37 AM |
| Question about pricing/sizing used rims | My_third_Z | Wheels & Tires | 2 | 05-23-2011 06:45 PM |
| TE37 SL sizing question | VancouverZ34 | Wheels & Tires | 4 | 05-15-2011 08:17 PM |
| sizing info | whoLEEoh | Wheels & Tires | 1 | 05-15-2011 12:22 PM |
Threaded Mode
