What Siize Spacers?

Originally Posted by XwChriswX

It happens.

As for the rubber, wider is better, that's why I went with the 295, some go 305 on 10.5" wheels, which is fine too. Also I'm 7AT, so I don't have nearly as much "instant" power as soon as you get on it so that's a negative.

But as for platform ability, most people have seen the motor handles FI quite well, it's the tranny that gives first... I think it's only rated to 399 TQ?? (Correct me if I'm wrong old wise ones) And of course that's with different uses and drivers specific.

Then there are the tunes, most I believe have a "500hp" tune for fun days or track days, but for daily use will have a safer 400-450hp tune. It all really depends, like anything else as long as you take care of it and have the proper supporting mods, it can be just fine.

Originally Posted by ///PureSwank

Stock Engine Block?

That was what I was told. Feel free to chime in on that info. My concern afterwards was having that amount of power on this type of platform.

Originally Posted by XwChriswX

Those numbers are spot on. That's what most people have built to for daily/street use and been safe with. My goal is either a single or twin turbo, haven't fully decided yet... Still giving it some time to see what all comes out and go from there. I know I need the AT upgrades so I'll probably do those first so it can Handle the improved power.

Originally Posted by ///PureSwank

You might not have the Manual "instant power" your talking about. But we all know Automatic is quicker from a dig which is why most serious drag racers tend to go with built automatic transmission conversions. They both have pros and cons. I just don't know to much about these cars. First time buying an import. Could'nt resist the looks of this baby.

fyi I have a manuel.

Originally Posted by Nubz

Damn....I have Vossen 10.5 on the rear with 305 tires, so is 15mm to big?

Originally Posted by XwChriswX

No worries, gotta start somewhere right?




What is the offset?

Originally Posted by Nubz

This is the only thing I could find..."Comes with a 20x10.5 wheel size, 5x130 bolt pattern and 27mm or 42mm offset."