Installing b2designs front spacers

Mr. G · 07-25-2012, 11:06 AM

So went today to install my 20mm spacers up front when i notice aside the bolts to hold the wheel in place there is also another smaller bolt that sticks out in between the bolts for the wheels. Guessing its used to hold the disc brake in place? Is that supposed to be removed?
Any help is appreciated. My Z is not USDM but bought locally in Panama or PDM

.
Tks

tjlazer · 07-25-2012, 11:24 AM

Remove it, its for not accidentally installing the rear wheels on the front.

GetYourWheels · 07-25-2012, 11:25 AM

Quote:

Originally Posted by tjlazer

Remove it, its for not accidentally installing the rear wheels on the front.

This is correct.

Mr. G · 07-25-2012, 11:27 AM

Thanks for the quick reply. How do i go about it? Cut it off?

GetYourWheels · 07-25-2012, 11:34 AM

I believe it is a 13mm socket and un screw it.

Mr. G · 07-25-2012, 11:50 AM

Worked thanks!!

GetYourWheels · 07-25-2012, 11:56 AM

You are welcome.

kenchan · 07-25-2012, 12:53 PM

15min later.... uh.... doesn't fit correctly?

Mr. G · 07-25-2012, 01:55 PM

It actually did! I couldnt be happier with my new spacers. No vibration at all during acceleration or braking. I was very worried that I would get that but works perfectly.

Also installed some Eibach prokits and the car looks fantastic.

kenchan · 07-25-2012, 01:56 PM

GJ, post picts!

Bigviet23 · 07-25-2012, 02:30 PM

I got the same set up. Make sure to tighten the lugs to the wheels. I forgot to tighten one whole wheel and luckily figured it out before something really bad happening.

kenchan · 07-25-2012, 03:26 PM

also a good idea to use some loctite (blue) on the smaller lugs holding the spacers to the hub and letting dry over night.

binary0x01 · 07-25-2012, 03:54 PM

I am returning my spacers to KamiSpeed, decided against putting em on.

Hopefully freakin whiteline bars will come in soon...

kenchan · 07-25-2012, 04:28 PM

Quote:

Originally Posted by binary0x01

I am returning my spacers to KamiSpeed, decided against putting em on.
Hopefully freakin whiteline bars will come in soon...

why's that?

Mr. G · 07-27-2012, 06:26 PM

Pics!

07-25-2012, 11:06 AM	#1 (permalink)
Mr. G Base Member Join Date: Jun 2012 Location: Panama Posts: 16 Drives: 2010 Nissan 370z Rep Power: 12	Installing b2designs front spacers So went today to install my 20mm spacers up front when i notice aside the bolts to hold the wheel in place there is also another smaller bolt that sticks out in between the bolts for the wheels. Guessing its used to hold the disc brake in place? Is that supposed to be removed? Any help is appreciated. My Z is not USDM but bought locally in Panama or PDM . Tks

07-25-2012, 11:24 AM	#2 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Remove it, its for not accidentally installing the rear wheels on the front. RafPR likes this. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

07-25-2012, 11:34 AM	#5 (permalink)
GetYourWheels A True Z Fanatic Join Date: Feb 2011 Location: Southern California Posts: 3,816 Drives: 2011 BMW M3 Rep Power: 21	I believe it is a 13mm socket and un screw it. __________________ Email : Eddie@GetYourWheels.com \| Tel: (562)249-7184 \| Your Wheel Fitment Specialist / Wheel & Tire Deal via DM Top Tiers Dealers - Avant-Garde / Forgestar / Rohana / Stance / Vossen + More https://live.staticflickr.com/65535/...de6886f7a7.jpg

07-25-2012, 11:56 AM	#7 (permalink)
GetYourWheels A True Z Fanatic Join Date: Feb 2011 Location: Southern California Posts: 3,816 Drives: 2011 BMW M3 Rep Power: 21	You are welcome. __________________ Email : Eddie@GetYourWheels.com \| Tel: (562)249-7184 \| Your Wheel Fitment Specialist / Wheel & Tire Deal via DM Top Tiers Dealers - Avant-Garde / Forgestar / Rohana / Stance / Vossen + More https://live.staticflickr.com/65535/...de6886f7a7.jpg

07-25-2012, 02:30 PM	#11 (permalink)
Bigviet23 Base Member Join Date: Dec 2011 Location: Dallas (Allen now) Posts: 237 Drives: 2009 MB manual Rep Power: 13	I got the same set up. Make sure to tighten the lugs to the wheels. I forgot to tighten one whole wheel and luckily figured it out before something really bad happening. __________________ My slow build http://www.the370z.com/members-370z-...ar-so-far.html

07-25-2012, 11:27 AM	#4 (permalink)
Mr. G Base Member Join Date: Jun 2012 Location: Panama Posts: 16 Drives: 2010 Nissan 370z Rep Power: 12	Thanks for the quick reply. How do i go about it? Cut it off?

07-25-2012, 11:50 AM	#6 (permalink)
Mr. G Base Member Join Date: Jun 2012 Location: Panama Posts: 16 Drives: 2010 Nissan 370z Rep Power: 12	Worked thanks!!

07-25-2012, 12:53 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	15min later.... uh.... doesn't fit correctly?

07-25-2012, 01:55 PM	#9 (permalink)
Mr. G Base Member Join Date: Jun 2012 Location: Panama Posts: 16 Drives: 2010 Nissan 370z Rep Power: 12	It actually did! I couldnt be happier with my new spacers. No vibration at all during acceleration or braking. I was very worried that I would get that but works perfectly. Also installed some Eibach prokits and the car looks fantastic.

07-25-2012, 01:56 PM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	GJ, post picts!

07-25-2012, 03:26 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	also a good idea to use some loctite (blue) on the smaller lugs holding the spacers to the hub and letting dry over night.

07-25-2012, 03:54 PM	#13 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 13	I am returning my spacers to KamiSpeed, decided against putting em on. Hopefully freakin whiteline bars will come in soon... __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
B2Designs Hub-Centric bolt-on wheel spacer for Nissan Application	b2autodesigns	Tires/Wheels	535	04-23-2019 06:24 AM
Installing Project Kics Spacers (Questions)	DEpointfive0	Wheels & Tires	0	07-04-2012 12:23 PM
steering noise after installing spacers	Alexshen1	Wheels & Tires	2	05-29-2012 05:25 PM
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 12:20 PM
Spacers for Front Speakers Help	Carbon_z	Audio & Video	9	11-09-2010 09:42 AM