painting a wheel spacer?

JAYNO20 · 03-01-2013, 09:20 PM

Is this possible to do without any problems? Painting it flat black to match the rotors for decreased visibility....

w0rM · 03-01-2013, 09:22 PM

You're prolly better off powder coating. Not sure how it would affect the extended studs. Might cause issues with the threads.

NOFATCHX · 03-01-2013, 10:39 PM

I painted, no problems however the paint has chipped away slightly where the wheel meets the spacer. I sprayed entire thing, no issues otherwise.

JAYNO20 · 03-01-2013, 10:43 PM

Quote:

Originally Posted by w0rM

You're prolly better off powder coating. Not sure how it would affect the extended studs. Might cause issues with the threads.

The studs wouldn't get painted... this is a question regarding the V1 spacers.. The studs remain on the car while the spacer itself gets painted.

w0rM · 03-01-2013, 10:51 PM

Quote:

Originally Posted by JAYNO20

The studs wouldn't get painted... this is a question regarding the V1 spacers.. The studs remain on the car while the spacer itself gets painted.

Gotcha... shouldn't be an issue then.

axmea? · 03-02-2013, 12:40 AM

Idk. It is cheap but too much time and effort for a mod that does not do much. Just my personal opinion.

/Angelo350Z/ · 03-02-2013, 01:37 AM

Just use some brake caliper spray paint or powder coat them if you're willing to spend more. That's actually a great idea.

Waiz · 03-02-2013, 01:47 AM

My spacers are spray painted and have been for about 4 years, does no harm at all

Old photo with my base brakes and red lugs, as you can see it makes a big difference behind a black wheel that it's not a shiny silver spacer

Mike · 03-02-2013, 07:10 AM

mine are powdercoated, but just make sure to mask off the front and rear mounting surfaces and just paint the outside of it. That way they won't get stuck to the wheel or rotor.

JAYNO20 · 03-02-2013, 12:25 PM

Quote:

Originally Posted by /Angelo350Z/

Just use some brake caliper spray paint or powder coat them if you're willing to spend more. That's actually a great idea.

Yeah I was just thinking about it when I was looking at the newly installed spacers.. Figured it is a good way to make them blend in a little more.

NOFATCHX · 03-02-2013, 04:25 PM

Quote:

Originally Posted by axmea?

Idk. It is cheap but too much time and effort for a mod that does not do much. Just my personal opinion.

Done right spacers are a small mod that can make a big difference at the very least, visually

03-01-2013, 09:20 PM	#1 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	painting a wheel spacer? Is this possible to do without any problems? Painting it flat black to match the rotors for decreased visibility.... __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

03-01-2013, 09:22 PM	#2 (permalink)
w0rM A True Z Fanatic Join Date: May 2012 Location: Houston, TX Posts: 2,198 Drives: 2015 Corvette Z06 Rep Power: 36	You're prolly better off powder coating. Not sure how it would affect the extended studs. Might cause issues with the threads. __________________ \| SOLD September 14th, 2013 \| My Build Journal

03-01-2013, 10:39 PM	#3 (permalink)
NOFATCHX Track Member Join Date: Apr 2011 Location: New York Posts: 532 Drives: 2011 370Z Rep Power: 15	I painted, no problems however the paint has chipped away slightly where the wheel meets the spacer. I sprayed entire thing, no issues otherwise. __________________ 20x10.5 Vossen CV3s, Falken, Stillen, AAM, Topspeed, BC Racing, ICHIBA, 180 CUSTOM, Satin Pearl White and Carbon wrapped Instagram: 10acious_Z

03-02-2013, 12:40 AM	#6 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,234 Drives: WELL ZED PW 6MT Rep Power: 53241	Idk. It is cheap but too much time and effort for a mod that does not do much. Just my personal opinion. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

03-02-2013, 01:37 AM	#7 (permalink)
/Angelo350Z/ A True Z Fanatic Join Date: Feb 2013 Location: Germany Posts: 2,230 Drives: Z34 \| MK7 \| F82 Rep Power: 3660	Just use some brake caliper spray paint or powder coat them if you're willing to spend more. That's actually a great idea. __________________ 2013 MB NISSAN 370Z SPORT

03-02-2013, 01:47 AM	#8 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	My spacers are spray painted and have been for about 4 years, does no harm at all Old photo with my base brakes and red lugs, as you can see it makes a big difference behind a black wheel that it's not a shiny silver spacer Last edited by Waiz; 03-02-2013 at 01:53 AM.

03-02-2013, 07:10 AM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	mine are powdercoated, but just make sure to mask off the front and rear mounting surfaces and just paint the outside of it. That way they won't get stuck to the wheel or rotor. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Spacer Indecisiveness!!	370SteeZ	Wheels & Tires	18	02-22-2015 12:02 AM
Wheel/Spacer ?	bjblackout	Wheels & Tires	1	03-16-2012 10:55 PM
[WTB] WTB wheel spacer	Xsad	Parts for sale (Private Classifieds)	7	10-30-2011 04:06 PM
which wheel spacer is better?	x102x	Exterior & Interior	10	07-06-2011 06:20 AM
wheel Spacer question	edub370	Brakes & Suspension	32	05-25-2011 05:03 PM