What wheels are people running for AutoX?

OMGWTFBBQ

What offset and camber setting would you be running to fit that much wheel and tire in the front?

ChrisSlicks

I've only run 345 on an 11". I think a 12" wheel would work too, but be advised that the 345 takes all the space and then some It rubs on the inside just a hair under lateral load. I'm not sure what the exterior "flushness" requirements are for SCCA, but it is possible that I could move the wheel out another 5mm without rubbing the fender.

I use a 10" wheel right now with a 315. The offset will need to be quite conservative, +27 to +32 with 3 to 3.5 degrees of camber. With more camber you would need a lower offset. I'm going to test fit my 10.5 +15 up front but I think that might be too much.

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms

gomer_110

In the ASP class there is no "flushness" requirement. Wheels of any diameter, width, and offset are permitted.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock