Tpms

Shift · 06-02-2009, 08:13 PM

Replacing the stock 18's with Forgestar F-14 (19)
Not wanting to break down the stock tires to get the TPMS out.
Does anyone know where to get a TPMS that will work with the OEM system?

Musashi · 06-03-2009, 07:06 AM

Recommend getting the actual nissan part. you don't know the compatibility with an aftermarket tpm. I can't imagine you saving enough money for it to be worth the aggravation with an aftermarket part. I buy must genuine nissan parts from courtesy nissan, they have a great website.

wstar · 06-03-2009, 09:22 AM

Well Courtesy lists it here as part 40700M in this diagram: 253 Electrical Unit :: Body Electrical :: Genuine Nissan Parts :: 370Z Parts (Z34) 2009+ :: CourtesyParts.com

But there's no link for price/purchasing. I imagine anyone can source this though. If they're cheap I might go this route too, it would allow me to just take my new tires and wheels down for mounting and balancing without taking my old set off and unmounting the tires just to get the sensors out.

nogoodname · 06-03-2009, 09:27 AM

i recommend not even getting one........i didnt get any for my winter setup.

i dont see much use of it b/c i check my pressures consistently anyways

spearfish25 · 06-03-2009, 10:40 AM

Don't you get an error displayed if you don't have the TPMS system on the rims?

nogoodname · 06-03-2009, 10:41 AM

it flashes for only a few Km's and then it just stays on....no biggie

wstar · 06-03-2009, 10:53 AM

It would be nice from an installation standpoint, as well as balancing standpoint, to not use the TPMS. I kinda considered it for my new setup. Hell I still might leave them out, I donno. The reason I tend to favor leaving them in: My last car didn't have TPMS, and once I picked up a nail in my right rear tire, probably in a construction area at the beggining of the drive, during a commute into the office (45 minute drive, mostly low-speed straight line on the highway). Didn't notice until I got downtown and started making turns again, and something felt 'off'. Tire had 10psi left by the time I parked in the parking garage and patched/reinflated. When not cornering, it's easy to miss this kind of thing on a low-profile tire with stiff sidewalls.

Shift · 06-03-2009, 11:48 AM

Just for that reason, is why I want them in. Sometimes you can't tell you have a flat tire.
I wish to avoid any damage to the rim and possibly the car.

CBRich · 06-03-2009, 12:01 PM

I too would be most interested in using a second set of stock TPMS sensors in the aftermarket wheels. But how do these communicate with the vehicle? What if you have the stock set just hanging out in your garage with your car? Will the vehicle know which set to communicate with? Maybe someone has a good explanation of the workings of this system.

nogoodname · 06-03-2009, 01:06 PM

^^ that's a good question.

i'm kinda iffy on this.....ask Shariff, he's a wheel know it all..

semtex · 06-03-2009, 07:32 PM

There's a procedure that is detailed in the service manual to connect the new TPMS sensors with your car. You know how when you buy a new Bluetooth headset you have to pair it with your phone? Or for that matter, you have to pair your phone with the Bluetooth in your Z (Touring model)? Same concept, except much more complicated. In fact, it looks like you have to take it to a dealer to have it done. First there's a Transmitter Wake Up Operation, which requires a transmitter activation tool. Then there's a Transmitter ID Registration procedure, which is like the Bluetooth pairing analogy.

Shift · 06-04-2009, 02:18 PM

Ok just heard from my dealer today. They said an aftermarket Might work, but would have to activated by the dealer. With that said they didn't know which aftermarket brand would work.
Four new sensors from the dealer are 480.00 Plus 50.00 to activate them.

wstar · 06-04-2009, 02:44 PM

Good info, guess I'll be moving my existing ones over

Shift · 06-10-2009, 04:54 PM

Shouldn't you have the part number, if you can get a price for it?

Shift · 06-20-2009, 01:07 PM

I guess not since nothing else was posted.....

06-02-2009, 08:13 PM	#1 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 58 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	Tpms Replacing the stock 18's with Forgestar F-14 (19) Not wanting to break down the stock tires to get the TPMS out. Does anyone know where to get a TPMS that will work with the OEM system?

06-03-2009, 09:22 AM	#3 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Well Courtesy lists it here as part 40700M in this diagram: 253 Electrical Unit :: Body Electrical :: Genuine Nissan Parts :: 370Z Parts (Z34) 2009+ :: CourtesyParts.com But there's no link for price/purchasing. I imagine anyone can source this though. If they're cheap I might go this route too, it would allow me to just take my new tires and wheels down for mounting and balancing without taking my old set off and unmounting the tires just to get the sensors out. __________________ 7AT Track Car! Journal thread / Car setup details

06-03-2009, 10:53 AM	#7 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	It would be nice from an installation standpoint, as well as balancing standpoint, to not use the TPMS. I kinda considered it for my new setup. Hell I still might leave them out, I donno. The reason I tend to favor leaving them in: My last car didn't have TPMS, and once I picked up a nail in my right rear tire, probably in a construction area at the beggining of the drive, during a commute into the office (45 minute drive, mostly low-speed straight line on the highway). Didn't notice until I got downtown and started making turns again, and something felt 'off'. Tire had 10psi left by the time I parked in the parking garage and patched/reinflated. When not cornering, it's easy to miss this kind of thing on a low-profile tire with stiff sidewalls. __________________ 7AT Track Car! Journal thread / Car setup details

06-03-2009, 07:32 PM	#11 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 33	There's a procedure that is detailed in the service manual to connect the new TPMS sensors with your car. You know how when you buy a new Bluetooth headset you have to pair it with your phone? Or for that matter, you have to pair your phone with the Bluetooth in your Z (Touring model)? Same concept, except much more complicated. In fact, it looks like you have to take it to a dealer to have it done. First there's a Transmitter Wake Up Operation, which requires a transmitter activation tool. Then there's a Transmitter ID Registration procedure, which is like the Bluetooth pairing analogy. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

06-04-2009, 02:18 PM	#12 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 58 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	Ok just heard from my dealer today. They said an aftermarket Might work, but would have to activated by the dealer. With that said they didn't know which aftermarket brand would work. Four new sensors from the dealer are 480.00 Plus 50.00 to activate them. __________________ 2009 Mt Blue 7AT * GTSpec 4 point brace * Berk HFC * Stillen GEN III * Berk CBE * Forgestar F-14 * NISMO S Tuned Spoiler

06-03-2009, 07:06 AM	#2 (permalink)
Musashi Enthusiast Member Join Date: Mar 2009 Location: New Jersey Posts: 357 Drives: 09 370Z 6speed Rep Power: 607	Recommend getting the actual nissan part. you don't know the compatibility with an aftermarket tpm. I can't imagine you saving enough money for it to be worth the aggravation with an aftermarket part. I buy must genuine nissan parts from courtesy nissan, they have a great website.

06-03-2009, 09:27 AM	#4 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	i recommend not even getting one........i didnt get any for my winter setup. i dont see much use of it b/c i check my pressures consistently anyways

06-03-2009, 10:40 AM	#5 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1857	Don't you get an error displayed if you don't have the TPMS system on the rims?

06-03-2009, 10:41 AM	#6 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	it flashes for only a few Km's and then it just stays on....no biggie

06-03-2009, 11:48 AM	#8 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 58 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	Just for that reason, is why I want them in. Sometimes you can't tell you have a flat tire. I wish to avoid any damage to the rim and possibly the car.

06-03-2009, 12:01 PM	#9 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 545	I too would be most interested in using a second set of stock TPMS sensors in the aftermarket wheels. But how do these communicate with the vehicle? What if you have the stock set just hanging out in your garage with your car? Will the vehicle know which set to communicate with? Maybe someone has a good explanation of the workings of this system.

06-03-2009, 01:06 PM	#10 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	^^ that's a good question. i'm kinda iffy on this.....ask Shariff, he's a wheel know it all..

06-04-2009, 02:44 PM	#13 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Good info, guess I'll be moving my existing ones over __________________ 7AT Track Car! Journal thread / Car setup details

06-10-2009, 04:54 PM	#14 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 58 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	Shouldn't you have the part number, if you can get a price for it? __________________ 2009 Mt Blue 7AT * GTSpec 4 point brace * Berk HFC * Stillen GEN III * Berk CBE * Forgestar F-14 * NISMO S Tuned Spoiler

06-20-2009, 01:07 PM	#15 (permalink)
Shift Base Member Join Date: Apr 2009 Location: Glen Rock,PA Age: 58 Posts: 220 Drives: (370-Z MT Blue 7A) Rep Power: 17	I guess not since nothing else was posted..... __________________ 2009 Mt Blue 7AT * GTSpec 4 point brace * Berk HFC * Stillen GEN III * Berk CBE * Forgestar F-14 * NISMO S Tuned Spoiler

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPMS Malfunction? :confused:	LQbano	Wheels & Tires	3	05-24-2009 09:24 PM