370z MEATY TIRE THREAD

[FPenvy]

Originally Posted by Radride

Easy:

http://www.workwheelsusa.com/media/w...FR_2014_v1.pdf
http://www.workwheelsusa.com/media/w...IZING_0814.pdf

You can go up to 16" wide...

R.K.

Nice. now only if someone can tell me what offset and size will clear the sport brakes lol

[Radride]

Originally Posted by FPenvy

Nice. now only if someone can tell me what offset and size will clear the sport brakes lol

The wheels I listed will run you around 2800 for a pair if not more. If you're just using them for drag wheels, send out a set of oem wheels to get widened and run a spacer.

R.K.

[FPenvy]

Originally Posted by Radride

The wheels I listed will run you around 2800 for a pair if not more. If you're just using them for drag wheels, send out a set of oem wheels to get widened and run a spacer.

R.K.

oh i know work wheels aint cheap lol well aware.

originally i found 18x12 ROTA wheels for 275 each lol but they require a slight shave off of the rear calipers. not happening lol was my cheap route. havent found much that isnt expensive since.

[Radride]

Originally Posted by FPenvy

oh i know work wheels aint cheap lol well aware.

originally i found 18x12 ROTA wheels for 275 each lol but they require a slight shave off of the rear calipers. not happening lol was my cheap route. havent found much that isnt expensive since.

I don't know if I would trust a set of ROTA's for track application LOL. I wouldn't trust them on the street either.

R.K.

[FPenvy]

Originally Posted by Radride

I don't know if I would trust a set of ROTA's for track application LOL. I wouldn't trust them on the street either.

R.K.

yea they have issues but it was the first thing i found so i started there. still been working and researching.

[Radride]

Originally Posted by FPenvy

yea they have issues but it was the first thing i found so i started there. still been working and researching.

Unfortunately to get the clearance needed you'll have to run custom offsets which will lead you down the path of huge money. You're not going to be able to find your run of the mill cast wheels in a 12" wide.

R.K.

[FPenvy]

Originally Posted by Radride

Unfortunately to get the clearance needed you'll have to run custom offsets which will lead you down the path of huge money. You're not going to be able to find your run of the mill cast wheels in a 12" wide.

R.K.

yup. almost to the point of just getting a backup set of oem rays and running 305 DRs on them.

[VinceThe1]

Originally Posted by Radride

The wheels I listed will run you around 2800 for a pair if not more. If you're just using them for drag wheels, send out a set of oem wheels to get widened and run a spacer.

R.K.

Originally Posted by Radride

I don't know if I would trust a set of ROTA's for track application LOL. I wouldn't trust them on the street either.

R.K.

Widening wheels?? That's crazy, it's cutting the wheel in half and welding in a piece of aluminum in between. This is highly unsafe and not recommended for anything other than show cars that don't actually move.

I'd definitely trust Rotas way way more than widened wheels hahaha