SSR Wheels Thread

axmea? · 01-01-2014, 11:52 PM

I inquired at a dealer about the GTV03 Hypermesh last Feb/March. Said it would be out in June. Could not wait that long. It really came out later than that.

KaienZ34 · 01-02-2014, 06:10 AM

I love the look of the GT VO3

Waiz · 01-02-2014, 02:08 PM

Quote:

Originally Posted by axmea?

I inquired at a dealer about the GTV03 Hypermesh last Feb/March. Said it would be out in June. Could not wait that long. It really came out later than that.

I had no info regarding their previous release date but they have been doing a big promotion at and after SEMA for the new line

Quote:

Originally Posted by KaienZ34

I love the look of the GT VO3

Great looking wheel, all 3 versions are very Akebono/Brembo/StopTech friendly too

I'm partial to the GTV01, if I could part with my NISMO's those would be my next choice!

dvo · 01-03-2014, 05:43 PM

Quote:

Originally Posted by axmea?

I inquired at a dealer about the GTV03 Hypermesh last Feb/March. Said it would be out in June. Could not wait that long. It really came out later than that.

Don't know how that was because the US office never released any info regarding ETA it's release until around SEMA time. Even then, the first time the wheels were shown to the public was at Formula Drift Irwindale in October. Only in Japan did they ever release info publicly before that.

vividracing · 01-03-2014, 06:20 PM

The soonest to get the GTV03 is slated at late Feb- Early March from my last conversations. I contacted SSR the moment I saw these on the SSR Japan site and that was a week or two before SEMA from what I remember.

apx632 · 02-01-2014, 06:18 AM

Quote:

Originally Posted by Waizzz

Since there isn't a formal SSR thread to announce their new product with our very own Phelan & rin featured I have created one for you guys to post your setups and questions.

SSR Wheels - SSR Professor MS3

SSR SP1's

SSR MS1's

Would you happen to know the size and specs on the white Z with the SSR Sp1's on it? Pretty much would like the exact same set up for mine when the time comes.

Waiz · 02-01-2014, 06:26 PM

Quote:

Originally Posted by MUST

mm kinda fuzzy on the details...but i think its 20x9.5f +10 & 20x11r -4 ..the fuzzy part is i can't remember the disk types. i peeled the stickers off as these were supposed to get powdered/anodized but never got around to getting it done hah

...but it will soonish

Quote:

Originally Posted by apx632

Would you happen to know the size and specs on the white Z with the SSR Sp1's on it? Pretty much would like the exact same set up for mine when the time comes.

Quoted Musts post with his specs

Just remember that you need to factor in disc specs too depending on your brakes

KaienZ34 · 02-01-2014, 06:40 PM

SP1's user647_pic23622_1287952881.gif

apx632 · 02-02-2014, 06:38 AM

Quote:

Originally Posted by Waizzz

Since there isn't a formal SSR thread to announce their new product with our very own Phelan & rin featured I have created one for you guys to post your setups and questions.

SSR Wheels - SSR Professor MS3

SSR SP1's

SSR MS1's

Would you happen to know the specs on the SSR SP1's on the white Z? Black with polished lip?

apx632 · 02-02-2014, 06:49 AM

Quote:

Originally Posted by Waizzz

Quoted Musts post with his specs

Just remember that you need to factor in disc specs too depending on your brakes

Thank you very much for the posting that. Just one of those I saw the pic and knew that's exactly what I wanted.

I actually thought the wheels were wider than the specs say so I was a tad surprised. Now I just gotta find out if he had to do any fender work or not and I'm pretty much set.

KaienZ34 · 02-02-2014, 08:39 AM

I'm sure up front he had to roll the fenders and cut/mod the fender liners.

apx632 · 02-02-2014, 09:24 AM

Quote:

Originally Posted by MUST

mm kinda fuzzy on the details...but i think its 20x9.5f +10 & 20x11r -4 ..the fuzzy part is i can't remember the disk types. i peeled the stickers off as these were supposed to get powdered/anodized but never got around to getting it done hah

...but it will soonish

What kind of work with the fenders did you have to do as well as the suspension set up to get the stance?

KaienZ34 · 02-02-2014, 09:50 AM

I think he's running HKS coilovers.

KaienZ34 · 02-02-2014, 10:01 AM

Must said, "they are rolled and pulled by hand" check out this thread.

Rolled front fender pics requested please!!

apx632 · 02-02-2014, 10:25 AM

Quote:

Originally Posted by KaienZ34

Must said, "they are rolled and pulled by hand" check out this thread.

Rolled front fender pics requested please!!

Thank you very much for all of your help!

01-01-2014, 11:52 PM	#316 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	I inquired at a dealer about the GTV03 Hypermesh last Feb/March. Said it would be out in June. Could not wait that long. It really came out later than that. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

01-02-2014, 06:10 AM	#317 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I love the look of the GT VO3 6MT-Z34 likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

01-03-2014, 06:20 PM	#320 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	The soonest to get the GTV03 is slated at late Feb- Early March from my last conversations. I contacted SSR the moment I saw these on the SSR Japan site and that was a week or two before SEMA from what I remember. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

02-01-2014, 06:40 PM	#323 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	SP1's user647_pic23622_1287952881.gif Waiz likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

02-02-2014, 08:39 AM	#326 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I'm sure up front he had to roll the fenders and cut/mod the fender liners. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

02-02-2014, 09:50 AM	#328 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I think he's running HKS coilovers. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

02-02-2014, 10:01 AM	#329 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	Must said, "they are rolled and pulled by hand" check out this thread. Rolled front fender pics requested please!! Waiz likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*Official Aggressive Wheels & Fat Tires Thread*	Kingbaby	Wheels & Tires	35	12-19-2013 03:04 PM
370Z Picture Thread w/Wheels	SuperZeto	Wheels & Tires	20	12-22-2011 01:48 AM
Strasse Forged Wheels MEGA THREAD!!!!	bullitt5897	Wheels & Tires	112	09-12-2011 11:18 AM
ADV.1 Wheels Mega Thread AE Performance	Paul@AEperformance	Wheels & Tires	52	02-26-2010 01:33 PM