WORK Meister S1 3pc arrived!!!!!!!!!!!
 

:happydance:

http://i81.photobucket.com/albums/j2...6/IMG_0264.jpg

http://i81.photobucket.com/albums/j2...6/IMG_0270.jpg

http://i81.photobucket.com/albums/j2...6/IMG_0266.jpg

http://i81.photobucket.com/albums/j2...6/IMG_0272.jpg

http://i81.photobucket.com/albums/j2...6/IMG_0274.jpg

^ The only shoe closet a man can ever have.

Inclimate weather here in socal.... gonna dial in some stuff for the car and then it'll be show time.

PS Work Wheels is super legit.....

Specs? What tire sizes are you going with?

Interested to see them on your ride. In for more pics.

19x9.5

19x11

Havent decided on tires...... probably go stretched ROFLMAO! :ugh2:

Actually owe a big thanks to you guys on the forums for posting up your wheels/specs/pics.... gave me a better feel on what to end up doing.

Those are sweet! Can't wait to see them mounted up!

sweet wheels! I like the black hardware!

Nice, have you weighed them yet?

Thanks guys! :tiphat:

Ill post complete specs once I get them mounted. The rears are just amazing .. lip is maxed out with the offset that was chosen. Surprisingly they were not as heavy as I thought they'd be. I'll get some weights for you guys.

dang... :tup:

favorite wheels of all time... congrats! wish it the g had a better offset..

Ohhh in for installed pics!

Wow, those are really nice! in for pics

:eek:

IN 4 PICS!

Put them on your car and take a picture, we all want to see!

also one of my all time favorite wheel. congrats man!

I can say I had a hand in the decision makin!

You had a hand in cracking my front lip :mad:

I hate you! I love these wheels!!!!

What are the offsets? The fronts look a little shallow..

how'd you get step lip on 11"? have only seen step lip's available in half sizes or is this specifically the S1 design itself that has the step lip and available in all sizes?

good to see you went the 19's as well :) in the pics as I'm still deciding on wheels myself! :D

^ this. 19's and 18's only... an aging wheel sizes keep getting phased out.

You guys are killing me. :p

Alas 'tiz the season so:
http://i81.photobucket.com/albums/j2...wheelspecs.gif

The T-Disk is the highest pad for the Meisters and even then will still need a small spacer to clear the front Akebono brake caliper. My final offset is still unknown for the fronts as I'm still working on the setup. My rears will remain at et+0 19x11. I believe the new Meister S1R's will not need a spacer to clear but I wanted to go old school.

More shots showing the staggered fitment and the fronts.
http://i81.photobucket.com/albums/j2...06/photo-2.jpg

http://i81.photobucket.com/albums/j2...006/photo1.jpg

Merry Christmas everyone and Happy New Year!

Weighed them today as well:

Front- 27.2lb

Rear- 28.0lb

When are they going on the car?

hmmmmm i dont know yet... probably by next month Ill put them on for a test fit and snap some pics... i love wintertime but my car doesnt.

mmm yes. get them on

tease

:owned: ahh its a shitty one newayz!

10.5 in the front all day!!!!!!

Nice!

mount them already! I'm trying to get a set of these myself. Baller status ;)

cant wait to see !

Wahhhhhh! Soon enough guys. This winter kinda blows. Where the hell is the rain/snow? Us snowboarders need something to ride on. Bleh.

Still contemplating tires sizes. Oh and TMPS..

I spoke to the Work rep he says that ill have to use a strap for the TPMS. Said that the valve stem hole can be bored out to accommodate ours but didnt recommend it. Has any one had to strap their TMPS for their aftermarket wheels?

Just get a tpms adapter, Ive seen them before

honestly tpms arent necessary imo just check your tires for camber wear every couple months lol btw what are your offsets on those? I recommend a 225/35 front and a 255/35 or 245/35 rear but those are really stretched so unless u plan to slam your z like I do haha those are just suggestions.

Thanks for the advice ordered some short tpms adapters. Hopefully they work out!

My TPMS are coming in this week and Im planning on doing 225/35 and 265/35 for the stretched look with some no namers. Gonna see this project through. If I want more traction/function I can just go back to my stock Rays. We just had to be sunny this whole week. Next time I bump this will hopefully be with pics installed.

:pics:

I bought the iforged TPMS adapters and they didn't fit on my step lipped SSRs. The strap on adapter is the way to go.

Cant wait to see these bad boys mounted on your Z!! Sick wheels!!! Loving those sexy lips.

In for pics on the car!

Ahh my favorite wheel ever. :tiphat:

Friend of mine had a set of Meisters on his G35 that was slammed, so many damn compliments.

need pics on car right meow!

hey any updates on the TPMS adapter? I'm in the same situation as you with my work meisters. The hole for the valve stem is too small for the actual valve steam. I took a look at the strap method and i cant see how that solves our problem.

can anyone enlighten me? thanks