Will Enkei RPF-1 18" fit?

SPOHN

Yes they will fit. I've seen a couple of Z's with them. I almost went with them but I had to have 19's. My AME TM O2's are based on the RPF-1. I believe with the 18'' RPF-1 the best offset you can get is +22 offset front and back (wheels being 9.5F and 10.5R). Which is defiantly fine for the front. But you might want to run a 10-15mm spacer in the rear for DD if that reall matters to yea. I run a 10.

__________________

gaveup

According to enkeis sizing chart, they have a 18x10.5 +15 which is pretty damn flush for the rear no?

Link to sizing chart:
http://www.enkei.com/size_chart/RPF1.pdf

I was looking at getting (F)18x9 +18 (R)18x10.5 +15 for my Z. But I will have to wait until April for that. Also going to have them powdercoated from getyourwheels before delivery. I cant stand silver wheels. Probably going to go with something a little extreme as well.

__________________
2010 Magnetic Black Metallic 370Z 6M
stillen gen 3 CAI - topspeed test pipes - invidia gemini CBE - UpRev tune
301whp (HP Logic Mustang Dyno)

SPOHN

Yes it would be. I couldn't really remember. Thanks for clarifying.

__________________

ChrisSlicks

I have the 18x10.5 +15 which is fairly aggressive for the rear but works well and I have no rub issues. Probably requires fairly aggressive camber though, I'm at about -2.0 rear. The front is 18x10 +38, no fitment issues but no where near as aggressive as the rear fitment.

I also looked at the PF01 which is another great option (and available in black).

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms