Will Enkei RPF-1 18" fit?

KillerBee370 · 11-14-2011, 01:53 PM

I'm pretty good with a lot of car related stuff but a total noooooob when it comes to wheel offsets and sizes.

Question: Will the Enkei RPF-1 wheel in 18" fit my sport pckg brakes?

I was just tire shopping and I cannot stomach spending $325 ea. for the Bridgestone rears on my car. I just can't do it anymore. Not only that, but I frequent the track and want less weight on the car. The guy at Big-O Tires said they don't even stock any 19" tires and any "odd" sized tire is going to be much more expensive. WTF?

Belsavis · 11-14-2011, 03:26 PM

I was told they don't fit the sport brakes by Enkei dealer in Dallas. They fit fine over the base brakes though.

ChrisSlicks · 11-14-2011, 03:29 PM

Yes they will fit no problem. They even clear the Stillen AP Racing brakes which are a slightly bigger caliper than the stock sport brakes.

I have a set of 18x9.5 and 18x10.5 RPF-1.

SPOHN · 11-14-2011, 03:29 PM

Yes they will fit. I've seen a couple of Z's with them. I almost went with them but I had to have 19's. My AME TM O2's are based on the RPF-1. I believe with the 18'' RPF-1 the best offset you can get is +22 offset front and back (wheels being 9.5F and 10.5R). Which is defiantly fine for the front. But you might want to run a 10-15mm spacer in the rear for DD if that reall matters to yea. I run a 10.

gaveup · 11-14-2011, 03:32 PM

Quote:

Originally Posted by ChrisSlicks

Yes they will fit no problem. They even clear the Stillen AP Racing brakes which are a slightly bigger caliper than the stock sport brakes.

I have a set of 18x9.5 and 18x10.5 RPF-1.

Pics.
Now.

Red__Zed · 11-14-2011, 03:32 PM

^Iirc, the 18x9.5 +22 wont clear sport brakes and you need to step to the +15 which will rub slightly (if on stock-ish settings)

gaveup · 11-14-2011, 03:33 PM

Quote:

Originally Posted by SPOHN

Yes they will fit. I've seen a couple of Z's with them. I almost went with them but I had to have 19's. My AME TM O2's are based on the RPF-1. I believe with the 18'' RPF-1 the best offset you can get is +22 offset front and back (wheels being 9.5F and 10.5R). Which is defiantly fine for the front. But you might want to run a 10-15mm spacer in the rear for DD if that reall matters to yea. I run a 10.

According to enkeis sizing chart, they have a 18x10.5 +15 which is pretty damn flush for the rear no?

Link to sizing chart:
http://www.enkei.com/size_chart/RPF1.pdf

I was looking at getting (F)18x9 +18 (R)18x10.5 +15 for my Z. But I will have to wait until April for that. Also going to have them powdercoated from getyourwheels before delivery. I cant stand silver wheels. Probably going to go with something a little extreme as well.

SPOHN · 11-14-2011, 03:35 PM

Quote:

Originally Posted by gaveup

According to enkeis sizing chart, they have a 18x10.5 +15 which is pretty damn flush for the rear no?

Yes it would be. I couldn't really remember. Thanks for clarifying.

ChrisSlicks · 11-14-2011, 03:48 PM

I have the 18x10.5 +15 which is fairly aggressive for the rear but works well and I have no rub issues. Probably requires fairly aggressive camber though, I'm at about -2.0 rear. The front is 18x10 +38, no fitment issues but no where near as aggressive as the rear fitment.

I also looked at the PF01 which is another great option (and available in black).

KillerBee370 · 11-14-2011, 03:48 PM

Thanks for the info guys!

Quote:

Originally Posted by Red__Zed

^Iirc, the 18x9.5 +22 wont clear sport brakes and you need to step to the +15 which will rub slightly (if on stock-ish settings)

So I will have to step it up to the +15's? I'm definitely lower than stock with the coilovers so I assume this will make matters worse?

ChrisSlicks · 11-14-2011, 03:58 PM

Quote:

Originally Posted by gaveup

Pics.
Now.

Picasa pic

I have to apologize for the dirty car, several cones were injured that weekend.

gaveup · 11-15-2011, 08:08 AM

Quote:

Originally Posted by ChrisSlicks

Picasa pic

I have to apologize for the dirty car, several cones were injured that weekend.

Link doesn't seem to work for me

SPOHN · 11-15-2011, 08:47 AM

It works on my end.

Belsavis · 11-15-2011, 09:08 AM

Quote:

Originally Posted by ChrisSlicks

Picasa pic

I have to apologize for the dirty car, several cones were injured that weekend.

Looks like you have the PF01s.
Here are my RPF1s: Nissan 370Z Forum - Belsavis's Album: Wheels

F: 18x10 38
R: 10x10.5 15

Belsavis · 11-15-2011, 09:14 AM

Quote:

Originally Posted by Red__Zed

^Iirc, the 18x9.5 +22 wont clear sport brakes and you need to step to the +15 which will rub slightly (if on stock-ish settings)

Exactly what I was told. Mine barely clear the base brakes.

Quote:

Originally Posted by KillerBee370

I'm definitely lower than stock with the coilovers so I assume this will make matters worse?

Well I'll be lowered in the next few weeks so I can come back to you with more info on that.

11-14-2011, 01:53 PM	#1 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 51 Posts: 5,964 Drives: with passion Rep Power: 321	Will Enkei RPF-1 18" fit? I'm pretty good with a lot of car related stuff but a total noooooob when it comes to wheel offsets and sizes. Question: Will the Enkei RPF-1 wheel in 18" fit my sport pckg brakes? I was just tire shopping and I cannot stomach spending $325 ea. for the Bridgestone rears on my car. I just can't do it anymore. Not only that, but I frequent the track and want less weight on the car. The guy at Big-O Tires said they don't even stock any 19" tires and any "odd" sized tire is going to be much more expensive. WTF?

11-14-2011, 03:26 PM	#2 (permalink)
Belsavis Base Member Join Date: Jul 2009 Location: Houston, TX Posts: 65 Drives: 09 370Z PG M6 Rep Power: 15	I was told they don't fit the sport brakes by Enkei dealer in Dallas. They fit fine over the base brakes though. __________________ Stillen G3 \| Berk HFC \| Megan Y-Pipe \| Top Speed Y-Back \| Braille Relocate \| 4.08 Frontier Gears \| Quaife LSD \| Enkei RPF1 \| Conti DW \| Redline Fluids \| Swift Springs

11-14-2011, 03:29 PM	#3 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Yes they will fit no problem. They even clear the Stillen AP Racing brakes which are a slightly bigger caliper than the stock sport brakes. I have a set of 18x9.5 and 18x10.5 RPF-1. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

11-14-2011, 03:29 PM	#4 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yes they will fit. I've seen a couple of Z's with them. I almost went with them but I had to have 19's. My AME TM O2's are based on the RPF-1. I believe with the 18'' RPF-1 the best offset you can get is +22 offset front and back (wheels being 9.5F and 10.5R). Which is defiantly fine for the front. But you might want to run a 10-15mm spacer in the rear for DD if that reall matters to yea. I run a 10. __________________

11-14-2011, 03:48 PM	#9 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	I have the 18x10.5 +15 which is fairly aggressive for the rear but works well and I have no rub issues. Probably requires fairly aggressive camber though, I'm at about -2.0 rear. The front is 18x10 +38, no fitment issues but no where near as aggressive as the rear fitment. I also looked at the PF01 which is another great option (and available in black). __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

11-14-2011, 03:32 PM	#6 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	^Iirc, the 18x9.5 +22 wont clear sport brakes and you need to step to the +15 which will rub slightly (if on stock-ish settings)

11-15-2011, 08:47 AM	#13 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	It works on my end. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Enkei Fn-18 what do you guys think ?	Joe711	Wheels & Tires	10	09-25-2011 07:52 AM
[FOR SALE] Enkei 18" FD-05 limited edition	Z_ealot	Parts for sale (Private Classifieds)	9	08-15-2011 11:13 PM
[FOR SALE] Set of new Enkei RPF1 18x10.5" ET15 5x114.3PCD	rpmchris	Parts for sale (Private Classifieds)	11	05-16-2011 05:57 AM
Tire size for Enkei stock 18" wheels	Cmike2780	Wheels & Tires	18	07-19-2010 12:33 PM
Enkei GTC01 20" + TEIN MonoFlex	yai_offset	Wheels & Tires	26	07-17-2009 10:18 AM