ABS+traction control+slip lights all on please help

ChrisSlicks · 06-08-2011, 11:03 AM

Sounds like one of the wheel speed sensors got damaged when they were replacing the studs. You will see the wire coming down near the brake hose and it is held in the control arm by a little 10mm bolt.

Don't worry about the TPMS sensors, has no effect other than the flashing light.

zuperman 370 · 06-08-2011, 11:22 AM

Quote:

Originally Posted by ChrisSlicks

Sounds like one of the wheel speed sensors got damaged when they were replacing the studs. You will see the wire coming down near the brake hose and it is held in the control arm by a little 10mm bolt.

Don't worry about the TPMS sensors, has no effect other than the flashing light.

So how do I get that fixed do I have to reattach the wire or does something have to be replaced from the dealership?

ChrisSlicks · 06-08-2011, 11:31 AM

Quote:

Originally Posted by zuperman 370

So how do I get that fixed do I have to reattach the wire or does something have to be replaced from the dealership?

If the sensor wire is damaged then it needs to be replaced. You can see if it is throwing a code to see if that is what it is. If you turn the front wheels all the way left or right you might be able to see the wire without taking the wheel off.

virtuosoondis · 06-09-2011, 04:59 AM

Quote:

Originally Posted by ChrisSlicks

Sounds like one of the wheel speed sensors got damaged when they were replacing the studs. You will see the wire coming down near the brake hose and it is held in the control arm by a little 10mm bolt.

Don't worry about the TPMS sensors, has no effect other than the flashing light.

Damm so ur saying if u remove that lil 10mm bolt all them lights might go on.I need to remove it to put my wheels on

ChrisSlicks · 06-09-2011, 05:35 AM

Quote:

Originally Posted by virtuosoondis

Damm so ur saying if u remove that lil 10mm bolt all them lights might go on.I need to remove it to put my wheels on

Not the 10mm bolt that was on your brake rotor, you can take that off. In behind the brake rotor and caliper is where the wheel speed sensor attaches to the hub. The sensor is plastic and held by a 10mm bolt. There should have been no reason to touch it but someone may have hit it inadvertently.

virtuosoondis · 06-09-2011, 07:12 AM

Quote:

Originally Posted by ChrisSlicks

Not the 10mm bolt that was on your brake rotor, you can take that off. In behind the brake rotor and caliper is where the wheel speed sensor attaches to the hub. The sensor is plastic and held by a 10mm bolt. There should have been no reason to touch it but someone may have hit it inadvertently.

Hey thanx Chris,how do I POP that off?someone said let someone step on the brake and use a 10mm or 12mm.

ChrisSlicks · 06-09-2011, 09:09 AM

Quote:

Originally Posted by virtuosoondis

Hey thanx Chris,how do I POP that off?someone said let someone step on the brake and use a 10mm or 12mm.

The one on the rotor I think is a 12mm, it is pretty easy to remove, shouldn't even need to step on the brake if you have enough leverage.

MuRdeReD_Out · 06-15-2011, 12:07 PM

Right after i put on my ADV.1's my car bogged down and the T/C light was flashing...idk just turned the car off then back on and never did it again. I didnt damage anything bc i put them on myself and no spacers

06-08-2011, 11:03 AM	#1 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 655	Sounds like one of the wheel speed sensors got damaged when they were replacing the studs. You will see the wire coming down near the brake hose and it is held in the control arm by a little 10mm bolt. Don't worry about the TPMS sensors, has no effect other than the flashing light. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Traction Control	joe370z	Australia/New Zealand	23	02-28-2021 07:27 PM
Traction control	bigZ	Nissan 370Z General Discussions	21	03-09-2011 11:17 PM
Traction Control Question	YamahaR6	Nissan 370Z General Discussions	8	07-13-2009 01:18 PM
Traction Control	ZSPEED	Nissan 370Z General Discussions	10	06-03-2009 05:34 PM
Traction Control NOT defeatable on 7AT!?!?	jmlenz	Nissan 370Z General Discussions	6	06-03-2009 03:48 PM

06-15-2011, 12:07 PM	#8 (permalink)
MuRdeReD_Out Base Member Join Date: Apr 2011 Location: Memphis Posts: 24 Drives: 2011 Nissan 370Z Rep Power: 16	Right after i put on my ADV.1's my car bogged down and the T/C light was flashing...idk just turned the car off then back on and never did it again. I didnt damage anything bc i put them on myself and no spacers