Broken Lug Nut Questions

oleg · 05-20-2011, 04:03 PM

So after getting my sports wheels damaged while the tires were being taken off i decided today to check all the tire pressure and re-torque all the wheels since i figured they probably messed up on it too. Turns out all my wheels were at 45-50psi and all lugs over torqued. one of the lug nuts thread inside was completely stripped when i pulled the lug nut out the part that was stripped was stuck in there and looked like a spring. My question is do you guys know any lug nut company that would sell a single lug nut? I have drag steel lug nuts on right now. Also the lug nut still can stay in there without being able to unscrew with just your hand so I'm keeping it in there but is it safe to drive spiritedly and occasionally sideways with only 4 lug nuts torqued to thee correct specs (front wheels lug)? What are the possibility of my stud also being stripped?

phohman · 05-20-2011, 04:27 PM

You should be OK , Don't know if I would get agressive though. Go to your auto parts store and they will sell you the stud/lug nut that you need. It is best to take a lug nut with you, be sure to try the nut on the stud that you buy!

ChrisSlicks · 05-20-2011, 05:11 PM

I wouldn't be going sideways with only 4 out of 5 but average driving should be okay.

You can pick up individual lugs at an Infiniti or Nissan dealer for about $6 each, just call first to make sure they have them. Online you can get 10 for about $36.

Check the thread on the lug, if it appears damaged then replace that too.

oleg · 05-20-2011, 05:32 PM

the problem is i need tuner lugs because im on forgestar f14s right now so i dont think i can get them from the dealer

djpathfinder · 05-20-2011, 05:42 PM

Man, you're not having much luck with wheel related stuff lately, are you! If you haven't completely lost confidence in your friend's uncle's shop up till now...well this is the straw that broke the camel's back. Those yahoos should be paying to replace your stud(s) and nut(s) that are stripped due to over-torquing, but I wouldn't trust them to do anything else to the car.

oleg · 05-20-2011, 05:53 PM

Quote:

Originally Posted by djpathfinder

Man, you're not having much luck with wheel related stuff lately, are you! If you haven't completely lost confidence in your friend's uncle's shop up till now...well this is the straw that broke the camel's back. Those yahoos should be paying to replace your stud(s) and nut(s) that are stripped due to over-torquing, but I wouldn't trust them to do anything else to the car.

Ya I absolutely gave up with that shop, I got no respect from them and no support from the friend that recommended them so I'm NEVER going there again i just need to find a better shop around here.

ChrisSlicks · 05-20-2011, 08:05 PM

Yeah the tuner lugs you will have to get a whole set unfortunately.

djpathfinder · 05-20-2011, 10:59 PM

Here are a couple of good threads on tuner nuts that people have gone with:
Quality lugs for aftermarket wheels ?

Which lugs for my Forgestar F14's?

I'm getting a set of Project Kics R40 when I get my new wheels.

oleg · 05-21-2011, 02:35 AM

These are the once I had Best Deals on Drag 12x1.25 Neo Chrome Open End Hex Chromoly Extended Lug Nuts everything Ive read so far pointed me toward getting steel lug nuts only. I know the neo color looks kind of cheesy in that pic but on my forgestars it actually looks pretty good IMO. I dont think I want to buy another full set of lug nuts but it will sure bug me that the one on the front left wheel will be different than the rest. I honestly do not know why tuner lugs like these and project kics have to be so expensive.

oleg · 05-21-2011, 02:49 AM

BTW djpathfinder thanks for helping me out with the wheels offsets before for the forgestars, I didn't get the spacers yet, but you got the specs perfect for my preference. Thanks again, I just posted up a few pics of it.

kenchan · 05-21-2011, 09:57 AM

op- make sure you post up the name of the shop who f-ked up your wheels, lugs, and your studs so that people in your area do not go there.

honestly speaking, if my lugs were stripped (and knowing the shop worked on all 4 wheels) i would replace all the studs and lugs as well, but that's just me.

djpathfinder · 05-21-2011, 10:27 AM

Quote:

Originally Posted by oleg

BTW djpathfinder thanks for helping me out with the wheels offsets before for the forgestars, I didn't get the spacers yet, but you got the specs perfect for my preference. Thanks again, I just posted up a few pics of it.

My pleasure. Glad it worked out for you. I'll have to find your other posts and look at those wheels.

05-20-2011, 04:03 PM	#1 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	Broken Lug Nut Questions So after getting my sports wheels damaged while the tires were being taken off i decided today to check all the tire pressure and re-torque all the wheels since i figured they probably messed up on it too. Turns out all my wheels were at 45-50psi and all lugs over torqued. one of the lug nuts thread inside was completely stripped when i pulled the lug nut out the part that was stripped was stuck in there and looked like a spring. My question is do you guys know any lug nut company that would sell a single lug nut? I have drag steel lug nuts on right now. Also the lug nut still can stay in there without being able to unscrew with just your hand so I'm keeping it in there but is it safe to drive spiritedly and occasionally sideways with only 4 lug nuts torqued to thee correct specs (front wheels lug)? What are the possibility of my stud also being stripped?

05-20-2011, 05:11 PM	#3 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	I wouldn't be going sideways with only 4 out of 5 but average driving should be okay. You can pick up individual lugs at an Infiniti or Nissan dealer for about $6 each, just call first to make sure they have them. Online you can get 10 for about $36. Check the thread on the lug, if it appears damaged then replace that too. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

05-20-2011, 05:42 PM	#5 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 734	Man, you're not having much luck with wheel related stuff lately, are you! If you haven't completely lost confidence in your friend's uncle's shop up till now...well this is the straw that broke the camel's back. Those yahoos should be paying to replace your stud(s) and nut(s) that are stripped due to over-torquing, but I wouldn't trust them to do anything else to the car. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

05-20-2011, 08:05 PM	#7 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	Yeah the tuner lugs you will have to get a whole set unfortunately. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

05-20-2011, 10:59 PM	#8 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 734	Here are a couple of good threads on tuner nuts that people have gone with: Quality lugs for aftermarket wheels ? Which lugs for my Forgestar F14's? I'm getting a set of Project Kics R40 when I get my new wheels. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

05-20-2011, 04:27 PM	#2 (permalink)
phohman Base Member Join Date: Feb 2011 Location: Katy-Houston Tx. Age: 62 Posts: 124 Drives: 2012 370Z Nismo Rep Power: 15	You should be OK , Don't know if I would get agressive though. Go to your auto parts store and they will sell you the stud/lug nut that you need. It is best to take a lug nut with you, be sure to try the nut on the stud that you buy!

05-20-2011, 05:32 PM	#4 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	the problem is i need tuner lugs because im on forgestar f14s right now so i dont think i can get them from the dealer

05-21-2011, 02:35 AM	#9 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	These are the once I had Best Deals on Drag 12x1.25 Neo Chrome Open End Hex Chromoly Extended Lug Nuts everything Ive read so far pointed me toward getting steel lug nuts only. I know the neo color looks kind of cheesy in that pic but on my forgestars it actually looks pretty good IMO. I dont think I want to buy another full set of lug nuts but it will sure bug me that the one on the front left wheel will be different than the rest. I honestly do not know why tuner lugs like these and project kics have to be so expensive.

05-21-2011, 02:49 AM	#10 (permalink)
oleg Enthusiast Member Join Date: Dec 2010 Location: Illinois Posts: 321 Drives: 2011 370z 6mt sp Rep Power: 15	BTW djpathfinder thanks for helping me out with the wheels offsets before for the forgestars, I didn't get the spacers yet, but you got the specs perfect for my preference. Thanks again, I just posted up a few pics of it.

05-21-2011, 09:57 AM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	op- make sure you post up the name of the shop who f-ked up your wheels, lugs, and your studs so that people in your area do not go there. honestly speaking, if my lugs were stripped (and knowing the shop worked on all 4 wheels) i would replace all the studs and lugs as well, but that's just me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car is broken-in.	AndreZ Cadena	Nissan 370Z General Discussions	33	07-07-2011 10:01 PM
Car broken into. @_@	definitionxmk	Hawaii	9	04-11-2011 05:20 PM
Questions, questions and more questions for a potential 370z buyer!	tag824	Nissan 370Z General Discussions	67	09-18-2010 12:07 AM
broken down zed	cyrus_b	Australia/New Zealand	10	05-19-2010 02:52 AM
Z mats broken	Mr Ed	Australia/New Zealand	30	02-10-2010 01:38 AM