Wheel Offset Discussion Thread... How far can we go?

cooltoy · 07-25-2013, 06:49 PM

Quote:

Originally Posted by kenchan

the front will look like you put on 25mm spacers on the sport 19" front.
the rear would look like, as you said, nismo wheel fit if you run minimum 285/35/19's.

Would that look unbalanced/odd?

Is that too far out up front? If it is not will I need to run a spacer in the back?

kenchan · 07-26-2013, 10:57 AM

Quote:

Originally Posted by cooltoy

Would that look unbalanced/odd?

Is that too far out up front? If it is not will I need to run a spacer in the back?

too far for me, but if you're lowered it could look okay i suppose. this is all subjective.

most of the time the car looks good from the side or diagnally from the side/rear... but from the dead front, the tire tread sticks out waaaay too much imo.

Xplicit97 · 08-09-2013, 06:59 PM

I posted in another thread but maybe this is a better place for my question. I am interested in going with a 20" staggered set up. I am dropped on Ark springs 1.5" F and 1.25" R with stock camber arms. I am curious what I can go with that will allow me to achieve the following: close to flush (but highly functional), as close to factory camber settings as possible, no rubbing, and a meaty tire setup. im thinking of around a 265/35/20 and a 295 or 305/30/20. Thanks for the info!

cooltoy · 08-09-2013, 07:33 PM

Have you looked trough this thread?

370z MEATY TIRE THREAD

cooltoy · 08-09-2013, 07:35 PM

Quote:

Originally Posted by kenchan

too far for me, but if you're lowered it could look okay i suppose. this is all subjective.

most of the time the car looks good from the side or diagonally from the side/rear... but from the dead front, the tire tread sticks out waaaay too much imo.

You are right, I do not like that loo either, but I am thinking the Amuse front, not being rounded at the bottom like stock front, might help out somewhat.

jtgarza3 · 09-23-2013, 09:28 AM

Does any one know if 19x10.5 +25 will fit the front of the Z? and if so what tire size do you recommend?

maximusz · 10-17-2013, 02:00 AM

Ok guys have some forgestar f14
19x9.5 +20
19x11 + 15

Going to be stock height for awhile but eventually lower

Going to run stock nismo tire sizes until I need new tires

Will it work?

Zwolf81 · 10-20-2013, 10:37 PM

I'm right there with maximusz. I swapped over my 350 wheels (19x10 +15 255/35 up front and 19x10 +15 285/35 out back) and I'm about to buy 19x11 +15 for my back two. I'm lowered on swifts and would like to know if this would work as well and a tire recommendation.

Zwolf81 · 10-30-2013, 10:41 PM

Anybody?

thongthumper · 03-01-2014, 01:59 PM

Will 20x10 -2 rear, 20x9 +38 front work? 285/25 zr 20 rear tires

Xplicit97 · 03-02-2014, 05:42 AM

So I have a Nismo with Ark springs all factory camber arms. Im curious what size / offset, wheels/tires I can fit with minimum neg camber and not stretching tires. Obviously I don't want to rub either.I'm Looking at 20" wheels. Thanks

Sent from my SPH-L710 using Tapatalk 2

Kmccarthy714 · 03-15-2014, 07:14 PM

I Have 19x9.5 +12 Front
19x10.5 +22 rear

Can i run stock tires safely, and without stretch? or do i need to bump them up if so what sizzes?

Awwthentic · 04-14-2014, 01:32 AM

Hey guys, I been researching sooo much on rim sizes haha. The look I want the most agressiveness but sit flush with the fender.

I'm on swift drop springs no camber kit YET.

I have 19x9.5 -2 and 19.10 -11.

These are laying around from my Infiniti build and was wondering if I added a 10mm to the front will it sit flush? They dont clear the BBK and I tried a 5/16 spacer but still hit caliper =/
So couldnt see if it stuck out past the fender with them on or not.

Here's the wheels

Camcam1616 · 05-30-2014, 06:29 PM

currently running

19x10.5-44
19x12-54

Xplicit97 · 06-10-2014, 01:33 AM

I'm curious I'm looking at Forgestar F10's. I would like to get a 20X10 F and a 20X11 or 20X12" R combination. What offsets will I need to get to be pretty close to flush, and clear BBK? I figure the 20X10 will need to be somewhere around the +30 range, but what would a 20X11 or 20X12 need to be? This will be going on a 2011 Nismo dropped on ark springs 1.5"R 1.75"F with stock camber arms. I don't want any crazy negative camber or stretched tires, preferably a meatier set up. I'm more about function than form. Thanks for the info

08-09-2013, 06:59 PM	#303 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	I posted in another thread but maybe this is a better place for my question. I am interested in going with a 20" staggered set up. I am dropped on Ark springs 1.5" F and 1.25" R with stock camber arms. I am curious what I can go with that will allow me to achieve the following: close to flush (but highly functional), as close to factory camber settings as possible, no rubbing, and a meaty tire setup. im thinking of around a 265/35/20 and a 295 or 305/30/20. Thanks for the info! __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

09-23-2013, 09:28 AM	#306 (permalink)
jtgarza3 Base Member Join Date: Sep 2010 Location: Corpus Christi, Texas Posts: 89 Drives: 370z Roadster Rep Power: 14	Does any one know if 19x10.5 +25 will fit the front of the Z? and if so what tire size do you recommend? __________________ Performance\|\|\| Stillen G2 Intake, Invidia Gemini CBE, CNT HFC, UpRev Tune\|\|\| Exterior \|\|\| 20" Vertini Drifts Gold, BC Coilovers, Evo-R Carbon Fangs, JDM Fog light \|\|\|Interior\|\|\| Jl 8w7, Jl 250/v2, Red GT-R Start Button, Razo Shifter \|\|\|

03-02-2014, 05:42 AM	#311 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	So I have a Nismo with Ark springs all factory camber arms. Im curious what size / offset, wheels/tires I can fit with minimum neg camber and not stretching tires. Obviously I don't want to rub either.I'm Looking at 20" wheels. Thanks Sent from my SPH-L710 using Tapatalk 2 __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

04-14-2014, 01:32 AM	#313 (permalink)
Awwthentic Base Member Join Date: Jul 2013 Location: SE TX Posts: 55 Drives: 13' 370z Rep Power: 11	Hey guys, I been researching sooo much on rim sizes haha. The look I want the most agressiveness but sit flush with the fender. I'm on swift drop springs no camber kit YET. I have 19x9.5 -2 and 19.10 -11. These are laying around from my Infiniti build and was wondering if I added a 10mm to the front will it sit flush? They dont clear the BBK and I tried a 5/16 spacer but still hit caliper =/ So couldnt see if it stuck out past the fender with them on or not. Here's the wheels Last edited by Awwthentic; 04-14-2014 at 02:31 AM.

05-30-2014, 06:29 PM	#314 (permalink)
Camcam1616 Base Member Join Date: Aug 2013 Location: Utah Posts: 129 Drives: 09 370z touring 6sp Rep Power: 11	currently running 19x10.5-44 19x12-54 zefaulter likes this.

08-09-2013, 07:33 PM	#304 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Have you looked trough this thread? 370z MEATY TIRE THREAD

10-17-2013, 02:00 AM	#307 (permalink)
maximusz Base Member Join Date: Apr 2013 Location: orange, tx Posts: 138 Drives: '10 red 370z nismo Rep Power: 12	Ok guys have some forgestar f14 19x9.5 +20 19x11 + 15 Going to be stock height for awhile but eventually lower Going to run stock nismo tire sizes until I need new tires Will it work?

10-20-2013, 10:37 PM	#308 (permalink)
Zwolf81 Base Member Join Date: Oct 2013 Location: Murfreesboro TN Posts: 12 Drives: 09 370z MB 7AT Rep Power: 11	I'm right there with maximusz. I swapped over my 350 wheels (19x10 +15 255/35 up front and 19x10 +15 285/35 out back) and I'm about to buy 19x11 +15 for my back two. I'm lowered on swifts and would like to know if this would work as well and a tire recommendation.

10-30-2013, 10:41 PM	#309 (permalink)
Zwolf81 Base Member Join Date: Oct 2013 Location: Murfreesboro TN Posts: 12 Drives: 09 370z MB 7AT Rep Power: 11	Anybody?

03-01-2014, 01:59 PM	#310 (permalink)
thongthumper Base Member Join Date: Dec 2013 Location: Cincinnati, Ohio Posts: 1 Drives: 2010 370 White 6spd Rep Power: 11	Will 20x10 -2 rear, 20x9 +38 front work? 285/25 zr 20 rear tires

03-15-2014, 07:14 PM	#312 (permalink)
Kmccarthy714 Base Member Join Date: May 2013 Location: Orange County, NY Posts: 77 Drives: 09 Brilliant Silver Rep Power: 11	I Have 19x9.5 +12 Front 19x10.5 +22 rear Can i run stock tires safely, and without stretch? or do i need to bump them up if so what sizzes?

06-10-2014, 01:33 AM	#315 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	I'm curious I'm looking at Forgestar F10's. I would like to get a 20X10 F and a 20X11 or 20X12" R combination. What offsets will I need to get to be pretty close to flush, and clear BBK? I figure the 20X10 will need to be somewhere around the +30 range, but what would a 20X11 or 20X12 need to be? This will be going on a 2011 Nismo dropped on ark springs 1.5"R 1.75"F with stock camber arms. I don't want any crazy negative camber or stretched tires, preferably a meatier set up. I'm more about function than form. Thanks for the info __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels Last edited by Xplicit97; 06-10-2014 at 01:37 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z offset	azn370z	Wheels & Tires	28	10-06-2010 09:53 PM
Need Help Indentifing a wheel ..	Q_USAF	Wheels & Tires	2	04-12-2009 11:06 PM
RAYS wheel nut.?	Chan Chee Hoe	Wheels & Tires	4	03-15-2009 09:02 PM
Peak Power discussion...	klubbheads	Engine & Drivetrain	4	02-19-2009 08:52 PM
Discussion Thread: 370z pictures from Europe 11.05.08	AK370Z	Nissan 370Z General Discussions	17	11-09-2008 04:04 PM