spacer question

sojirovskensi · 07-17-2011, 11:44 PM

I have stock 19 inch rim and tires and lowered with 1.5 (f)/1.3 (r) inches.
In this case, what spacers should I go with if I don't want to rub my fender?
I measured with my ruler and 10mm/15mm will put it in a danger situation, or I may be wrong.
I'm open to any opinions! Thanks!

Trips · 07-17-2011, 11:50 PM

I would suggest 20mm all around or 15mm in the front and 20mm in the rear

sojirovskensi · 07-18-2011, 12:05 AM

I am worried about 15mm spacer because vendors advertise that type 1 or something will not fit with stock wheels.
that's why I am leaning toward 20mm all around, but I don't want to rub my fender.

I guess if my car does that, I should just drop my car like 1.3/1.1

Trips · 07-18-2011, 12:15 AM

It shouldn't rub on 20's
I used to run 20's all around with Ichiba V2 and had no issues.

sojirovskensi · 07-18-2011, 12:30 AM

with how much drop?

Quote:

Originally Posted by Triple's

It shouldn't rub on 20's
I used to run 20's all around with Ichiba V2 and had no issues.

Trips · 07-18-2011, 12:33 AM

Quote:

Originally Posted by sojirovskensi

with how much drop?

I was on eibach springs when I had that setup to it was close to an 1"

if any lower like H&R's? maybe 15's all around would work

gaveup · 07-18-2011, 08:54 AM

Quote:

Originally Posted by Triple's

It shouldn't rub on 20's
I used to run 20's all around with Ichiba V2 and had no issues.

You ran V2 (bolt ons) on the front and they fit? Why is everywhere saying they won't?

hide187 · 07-18-2011, 09:40 AM

Quote:

Originally Posted by gaveup

You ran V2 (bolt ons) on the front and they fit? Why is everywhere saying they won't?

What he said. I was under the same impression

kenchan · 07-18-2011, 09:49 AM

Triple's knowz wat he's talking about.

for lowered cars on stock wheels, i too would do 20/20 all around and remove the splash guards if you have them. looks werd from the back.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacer question	alphawerx	Wheels & Tires	4	06-06-2011 12:09 AM
Noob spacer question	ddvette9	Brakes & Suspension	17	05-29-2011 05:40 PM
Noob Spacer Question	jeffreyfranz	Wheels & Tires	3	10-29-2010 04:40 PM
Spacer Question	fins	Nissan 370Z General Discussions	16	10-23-2010 08:06 PM
Another spacer question	craniac24	Wheels & Tires	5	04-05-2010 10:46 AM

07-17-2011, 11:50 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	I would suggest 20mm all around or 15mm in the front and 20mm in the rear

07-18-2011, 12:05 AM	#3 (permalink)
sojirovskensi Enthusiast Member Join Date: Sep 2010 Location: Dallas Texas Posts: 287 Drives: 10 Nissan 370z Wh M6 Rep Power: 14	I am worried about 15mm spacer because vendors advertise that type 1 or something will not fit with stock wheels. that's why I am leaning toward 20mm all around, but I don't want to rub my fender. I guess if my car does that, I should just drop my car like 1.3/1.1

07-18-2011, 12:15 AM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	It shouldn't rub on 20's I used to run 20's all around with Ichiba V2 and had no issues.

07-18-2011, 09:49 AM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Triple's knowz wat he's talking about. for lowered cars on stock wheels, i too would do 20/20 all around and remove the splash guards if you have them. looks werd from the back.