Volk lugnuts on Sports Rays

xbigb4ller69z

So I won't be able to use those at all because they damage the stock wheels? So which lug nuts should I run If I'm currently running 15MM spacers in the front and 20MM spacers in the rear.

Great... so it looks like I have to send those back then.

__________________
Eibach pro kit/ Stillen sway bars / SPC rear camber arms / F.I. 12" CBE / GTM TT / Southbend clutch stg 3 / ProSport Gauges/ ZSpeed Performance Heavy Duty Concentric Slave Cylinder / Twin Oil Coolers. / Tuned by HP Logic

Trips

Yes, Use the stock flat washer style lugs.
Paint the lugs and your done.
The End.

__________________

TipsZ

That is correct. The tapered design provide less contact area and will actually pop off under pressure. For the Rays you MUST have the flat-style washer lugs .. if anyone finds a vendor who provides them .. please let the 370z community know!

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

xbigb4ller69z

So there isn't 1 VENDOR that actually sells those? I'm not sure why concept z performance would advertise those lug nuts to be compatible with the factory wheels. That really sucks, so basically anyone can go and steal this rims.

Solution: go and buy aftermarket wheels???

__________________
Eibach pro kit/ Stillen sway bars / SPC rear camber arms / F.I. 12" CBE / GTM TT / Southbend clutch stg 3 / ProSport Gauges/ ZSpeed Performance Heavy Duty Concentric Slave Cylinder / Twin Oil Coolers. / Tuned by HP Logic

ZForce

The stock lugs on the 19 Rays wheels will work with your H&R spacers. The H&R 15mm & 20 mm wheel spacers came with replacement studs and the stock lugs work fine on my 20 mm fronts. I have 25 mm on the rears but they are bolt ons and the stock lugs also work fine.